Custom Clamp-On Muzzle Brake

Article number: MB1SS

Make your rifle more fun to shoot!!!

Our Clamp on Muzzle Brakes are precision machined to YOUR exact barrel specs. Tapered, Straight, or Stepped, we machine brakes for them all.

Because these brakes are custom cut to Your dimensions we can hold tighter tolerances on both the bore and bullet exit hole to greatly reduce recoil and muzzle rise (minimum 60%).

Our clamp on muzzle brakes are cnc machined from 416 stainless steel and
require no permanent modification to the original firearm. They can be installed using simple hand tools. No gunsmithing required.

During testing we found that the 5 port design makes the most efficient use of the available gasses exiting the barrel to substantially reduce recoil. There are 20 .078" holes drilled into the top of the brake that vent gas in order to stop muzzle rise. The bottom of the brakes have no holes or ports to kick up dirt all over the shooter. Having the bottom of the brake angled outward also helps to reduce muzzle rise. After months of testing and development the design of these brakes make them the most efficient clamp on muzzle brakes available today.

In case of measurement error we do re-cut the brakes at no charge*, however, please be as precise as possible in the measuring so we can continue this service for everyone. We ask for barrel measurements at the muzzle and 1 1/2" from the muzzle in thousandths of an inch, to make sure your new brake fits right the first time.

Please see Measuring Information for details.

Our Muzzle Brakes are made to order!

*We do charge shipping for the replacement brake.

Our Muzzle Brakes are made to order!

You will receive a confirmation email with tracking information, as soon as your order is shipped.


| Ethan 18-06-2022 18:01

Very impressed with this bolt on brake. Put it on a T3 lite 300 win mag and shot 10 rounds. No signs of loosening or issues. I can actually enjoy shooting the rifle at the range now.

| Thomas Green 28-12-2021 14:26

I got this muzzle brake for my FNAR 7.62x51. Took the weapon to the range a few days later, the difference was amazing!!! I’d have to say that the reduction in recoil had to be well over 70%. Follow-up shots came quick, didn’t have to reset after each shot, just Bang, Bang, Bang. Great work.

| Joseph Trespeces 13-12-2021 02:30

Received the brake 2 weeks. I was skeptical and hesitant about the brake if I installed it correctly. I checked the concentricity of the muzzle to the brake and i have plenty of clearance. Oh my goodness! It was better than expected. The 7MM Remington Magnum felt like butter! I was able to stay on target after the shot which was impossible before the brake. Thank You Mr. Witt.

| David Dalziel 13-10-2021 18:08

Received muzzle brake yesterday 10-12-2021, installed it today (no instructions provided - went on youtube and followed those instructions) then went to the range.
WOW!!! My Ruger M77 Mark II .338 Win. Mag. use to kick my 76 year old shoulder like a Mule,, but today it was like shooting a .22 rifle or my Henry .45 long colt.
I wear ear plugs and head gear when shooting this rifle - I did not notice it to be any louder than before!!
Why did I not purchase tis clamp on muzzle brake before???

| James Jackson 15-08-2021 02:21

REM 700 308win had just to much recoil than I’d like. Now it’s like shooting a 223. Great product and looks great

| Victor M 28-05-2021 15:25

Added a clamp on brake to my Weatherby Vanguard 2 in 30-06 since I tore my rotator cuff and the brake reduced the felt recoil to that of a 243 or less while still using my hand load that pushes a 165gr bullet over 3000 fps in my 30-06. I’m extremely impressed and satisfied with the clamp on brake.

| Peter Grimord 21-05-2021 23:19

I installed a Witt Clamp-on Muzzle Brake onto my Savage Striker 7mm-08 and it made my one-hole gun into an even better one-hole gun, and no recoil. Ignore all the crappy reviews of this product and the company service; both are top notch. I'll probably get one for my .223 Savage Striker in Stainless Steel in the near future!

| ronald hilton 04-05-2021 22:02

Had a Howa 1500 308win in an Oryx chassis; gun was not fun to shoot and actually not consistently accurate. This was probably largely due to my skillset, but ordered the Witt Clamp on brake and now it is a more manageable gun to shoot and in my hands more accurate. Just got back from range and shot two bug holes at 100 yards. The point of impact did shift slightly from previous bare barrel 100 yard zero, but easily adjusted.

| Glen Carlisle 14-02-2021 16:30

With all the negative reviews on this company I ordered a clamp on brake I ordered two anyway. As I read the reviews I found the people writing these had no idea what they were talking about. With that in mind I ordered one for my .308 and one for my .300 Win Mag. It took a while, about six weeks but I attributed that to being Christmas time. The quality of the work on the breaks is very good and they both fit perfectly. The design of the. break cut the recoil in half. My friend bought one from the competition and it doesn’t fit well and the astetic value is not as attractive as the Witt product. Good job Witt Machine.

| Chris 12-02-2021 13:28

I installed one of these on my Tikka T3 Lite in .300 Win Mag. This brake works better than I even hoped. My 8# magnum rifle kicks slightly more than a standard 5.56 AR. To say I’m happy with how well this works is an understatement.

| Chris b 28-11-2020 16:00

I just wanted to thank Witt machine for there work I ordered a bolt on break about 3 years ago very simple to attach and the out come was better than expected I attached to a 7mm rem mag and before 3 shots and then I would start spreading no more spreading I can shoot 10 rounds with out no problem now even my 10 year old son wants to take it hunting he shoots it with very little problem also we have shot rounds three this gun I had it 7 years and only got maybe 100 rounds threw it now we’re around if not over 1000 rounds so it a good buy thanks Witt machine look to doing business with you in the near future. I recommend this product to all just need hearing protection for you and whoever is around while shooting

| Cliff Walden 15-10-2019 07:52

I installed one on my .30-06, firing 150 grain ammo, I went through 40 rounds and never got a sore shoulder. No flinching anticipating the recoil, I'm sold. My dad is 86 years old and I put one on his .270 and he went through 40 rounds of 150 grain as well. Before he couldn't shoot more than 3 rounds in a day or he wouldn't be able to go back out because of his arthritis. Definitely sold on this muzzle brake.

| Keith Kmieczak 08-10-2019 01:11

Bought the clamp on muzzle brake for a Browning A-bolt II in 7mm WSM. I am completely satisfied after taking it to the range this weekend. The reduction in recoil is awesome. I shot a .243 with my daughter for comparison and there is not much more kick now with my 7mm. The beast is tame!! Clamping on was simple and a perfect fit. Will be purchasing another for a 300 Weatherby when I go west in a year or two. I did need to resight the gun in as POI dropped about 2 inches at 50 yards. No big deal and totally worth every penny!!

| Bee Carluss 23-05-2018 16:56

-Finally thawed enough to get to the range. Brake works great and reduced recoil to about what my Rem 700 Varmint in .204 is with a bull barrel. I will definitely recommend you to anyone wanting recoil reduction for their rifle.
Date Added: 03/05/2013

| Bill Thornton 23-05-2018 16:54

Absolutely incredible. My .270, weighing in at a little over 7lbs, kicks!! I ordered the clamp on muzzlebreak, and am very impressed. Witt dropped them off to me(I go to college in CO). Last weekend while at home, I shot it for the first time. My recoil had to be cut by 75%, it honestly felt like a .223. Super impressed and recommend to anyone!! Even looks great!
Date Added: 02/17/2013

| Thomas Trout 23-05-2018 16:54

Adds an awesome look to my rifle, as well as performance I still am in shock about.
Date Added: 04/05/2013

| Micheal F. 23-05-2018 16:53

The muzzle break worked out great, when I finish my next build I will be ordering from you again.
Date Added: 03/31/2013

| M. Chico 23-05-2018 16:53

I ordered three. Each worked like as advertised.!!
Date Added: 02/28/2013

| Paul K. 23-05-2018 16:52

I got a pair in today. Both going on varmint .308's. Ken is good to go. Had a problem out of either of our control, he stepped up and proved his worth. You can't deal with a better guy.
Date Added: 02/25/2013

| Tony S 23-05-2018 16:52

I just recieved my muzzle brake from you and I love it..It looks great and fits perfect. Thanks.
Date Added: 02/15/2013

| Robert T. 23-05-2018 16:51

OK. Got mine today and put it on my M&P this evening. I have never had a muzzle break on any of my rifles....and my honest opinion is that this thing is AWESOME!
I would say it virtually eliminates muzzle jump. My only problem is I made the mistake of letting my wife shoot it on my AR..She then promptly told me to get her one for her Bushy Corbon 15.
Date Added: 02/21/2013

| Daniel weskamp 23-05-2018 16:50

Looks awesome, plus turned my Savage 300 Win Mag into a 243. Could not believe the results. Purchased another of a Savage 6.5-284 predator hunter. Have not shot it yet but feel it will be like a 223. Great product.
Date Added: 04/29/2013

| John Watkins 23-05-2018 16:49

I can not believe my 3oo Remington Ultra just became fun to shoot. Hearing protection is required.
Date Added: 05/10/2013

| John Scofield 23-05-2018 16:45

I received my "State Compliant" AR15 with a plane barrel, no device, like a flash hider, etc. Tried a screw on device that is held on with four screws and was not what I wanted and I couldn't really use it with a flash hider anyway because it is unlawful. Tried a threading device and wound up screwing up the muzzle of my rifle AND the threads were not straight, so a threaded muzzle device was not true with the end of the barrel. Wanted a finished look to my expensive rifle and since the WITT Muzzle break is well made and fits TIGHT and also covered up the damage I did to my rifle I took the chance and followed the instructions and long story short the Muzzle break went on and is in perfect alignment with the bore and the rifle now looks and fires fine. The good part is that it is a legal device in my state and can if problems come up be removed and I can return the rifle to its original appearance. Measure twice and order this item you will not be disappointed.
Date Added: 06/09/2013

| Scott Dillon 23-05-2018 16:44

I shoot an over-bore, so recoil and muzzle jump is a big concern for me. So I bought a clamp-on brake, and have been to the range twice with it. I can't attest to exact numbers on recoil reduction, but from videos taken the muzzle jump is half of what it used to be and felt recoil is less as well. I noticed no drop-off in groupings (maybe just a tad tighter), so shooting while at range or hunting w/o the brake is no problem. I'm now able to put about 50 down range and don't come home with a busted-up shoulder. A word of caution though, get good ear protection as you'll need it (as with all brakes).
Another plus with the clamp-on as well is you can take it off (if you want) w/o having to cut threads off and recrown the barrel.
Date Added: 06/09/2013

| Glynn Sirmans 23-05-2018 16:44

Just got mine installed on my Model 7 Rem. 7mm-08, tested with several rounds and it works great. Big noticeable difference in recoil. It's a very light weight rifle and its
very pleasant to shoot now. Did several measurements with a Micrometer, fitted perfect.
Thanks, won't hesitate to get another one.
Date Added: 06/14/2013

| John Coffey 23-05-2018 16:43

Got mine last week took longer for snail mail to get it to me but I figured that much. Got it installed on my 25-06 not for the recoil but for the muzzle lift and now it sets right on target never moves and before it would jump about 6 inches to a foot left every shot. Also now I think my friends AR 15 has more recoil than my 25-06 does.
Date Added: 06/15/2013

| Milton Harris 23-05-2018 16:43

I was a skeptic but now I believe, my Browning A bolt 300 win. mag now shoots with less felt recoil than my 308 Win. I let my nephew fire a few rounds and in his words, "where can I get one"?
Date Added: 07/08/2013

| Todd Johnson 23-05-2018 16:42

Before I write the review I will start by explaining why I was in need of a muzzle brake. I am relatively new to long range shooting and I bought a Savage 111 with factory stock and sporter barrel in 7 rem mag as a project gun due to the cost of initial ownership. I see now why most people don't like shooting this gun due to the recoil that feels being hit in the shoulder with a hammer on every shot. This is when I decided to look for clamp on style of brakes since I didn't want to thread this barrel. I had found a different mfg. that I was going to use then I found Witt Machine. I read the reviews and at the price point of almost half of the other type of clamp on brake I was looking at I decided to try it out. I received my order as promised and I was very impressed with the inital observation of the overall workmanship and quality finish (I had my brake finished with Cerakote). I then followed the quide to install the brake onto my rifle and it could not have been easier. Now to the fun part. Yesterday, 7/26/13, I was finally able to get out to the range to see how the brake performed. The one word that would sum it up is "Unbelievable". The first shot I took I was prepared to be hit in the shoulder, maybe not as bad, but I still expected to feel the pain of shooting a magnum caliber round. But to my unexpected surprise I really felt nothing, but the light push of pressure. Also, instead of my barrel jumping off the table by several inches there was little to no barrel rise. The only down side to this of this brake, in my opinion, is that I found myself going through a lot more ammunition due to not having to stop and recover from the previously violent recoil. I would recommend this product 100% to anyone looking to tame the recoil of a magnum caliber rifle or anyone looking to prevent muzzle rise so they can reaquire their target faster. I know if I am ever in need of another brake Witt Machine is who I will purchase it from.

Todd Johnson
Date Added: 07/26/2013

| Gilmer Smith 23-05-2018 16:42

I have a Savage 110 in .30-06 that I bought new at a Walmart that was going out of business. Got the gun and scope pair for $200. That is one of the hardest kicking guns I have ever owned, actually would frog my shoulder on most shots.
I bought and installed the bolt on muzzle brake with black ceracote and I must say I was very skeptical and so was my gunsmith friend. I really was amazed at the reduction in recoil on this gun. It was reduced by over half and I am VERY please with the results as this gun is extremely accurate. I have now ordered the MB for my Colt AR-15.
Thumbs up all the way!!
Date Added: 07/26/2013

| frank mason 23-05-2018 16:41

wow.....put one on my 30-338 turned it a pussy cat use to kick like a mule..also put one on my 6-250 bench gun what a change ..thanks frank
Date Added: 07/30/2013

| Eduardo H Peralez 23-05-2018 16:41

My customer got the Ruger American .308 and after shooting it he asked me to sell it for him the kick was to much! I told him I had the cure for that "Witt Clamp On Muzzle Brake" I ordered one per measuring instructions for him and installed it with no problem it's so easy a caveman can do it! It also tamed my AR10 .308 Thanks Witt Machine!
Ed Sniper Peralez
Date Added: 08/08/2013

| Nathan Griffith 23-05-2018 16:40

I've installed this on an FN FNAR .308. First of all, I'm a mechanical engineer and know what a quality machined part is. Excellent finish and attention to detail all around. The Ceracoat was applied well. The finish was a good match for the parkerizing on my barrel though. The muzzle break installed very easily. I did use loctite per instructions and I highly recommend you do so as well. The screws on the clamp do not stand out excessively and I think it looks pretty good overall. The weight isn't bad. I didn't weigh it before installing but a lot of material has been removed making for a reasonably light compensator.

I took it to the range to test it out. This was an indoor 35 yard range. I didn't think it made the gun much louder from my perspective, but I wasn't standing off to the side where it's supposed to be bad. The performance of the brake was excellent. The recoil felt similar to an AR 15 .223 round instead of a .308. Control was excellent. The target stayed in my scope at full zoom and I could accuratly place shots into the bullseye about 2 per second. Compensators should really be standard issue on all rifles. They significantly improve the fire rate of a semi automatic rifle.
Date Added: 08/27/2013

| Bob Wintle 23-05-2018 16:40

Excellent craftsmanship. Put this on my Rem. 700 SPS 26" barrel 308. Fits perfect. Put 25 rounds through it & no problems. Still tight as when installed. Great instructions & great speedy service. Thanks Witt.
Date Added: 08/31/2013

| John McKnight 23-05-2018 16:40

I will say I was skeptical of the MB1 at first because of the low cost. It priced lower than most and to good looking.I installed the MB1 on a Howa 1500 .30-06 that weighs in @ over 10 lds fully rigged. The muzzle lift and felt recoil greatly reduiced. After 100 rounds the MB1 did not move from where it was shouldered against the barrel. I marked the barrel to check for any movement. The MB1 was the talk of the gun range after the first round went down range. I now can put EVERY ROUND in a 2.5in target @100 yards. Thanks Ken.OUTSTANDING PRODUCT.
Date Added: 09/01/2013

| tracie udey 23-05-2018 16:39

I received my brake about 1 month ago, and just found time to go out and shoot my 300 win mag. I figured I would notice a little difference In felt recoil, but it was incredible.. I have no way of measuring a percentage, but it feels like more than 65-70% to me. I spent a day and shot over 40 rounds through my gun and had zero after effects from recoil. Not only was the product all witt said it would be.. the customer service was also amazing, I was just logging In to check status on my order and less than 2 min later I received a call from them saying they had seen me online and gave me a verbal update on my order.. thats customer service! 110% satisfied, thank you!
Date Added: 09/24/2013

| William Dorsey 23-05-2018 16:39

got my brake and finished it myself in a Durabake finish that looks great on my savage model 10FP tactical. I was previously getting 3/8 inch groups at 100 yards, but I never saw an impact through the scope at 600 yards till I put this brake on. I now can see the bullet impact the target because the muzzle jump is almost eliminated. my 308 now feels like a 223. thanks Witt machine its a great product.
Date Added: 10/06/2013

| Nate Stewart 23-05-2018 16:38

I am yet to shoot with this product, but I wanted to promptly review the customer service. Witt Machine is standing in front of others in terms of customer service. I ordered this product in Aug. 2 weeks later I finally got to sight in my .30-06 for the first time. After getting my zero I attempted to install the muzzle brake, only to find that it would never fit. I misunderstood the directions for measurement, making the smallest point of the muzzle the largest point on the brake. This was a Saturday, and I happened to speak with a human on the phone in the early afternoon. The man on the phone asked me to re-measure and email the new numbers. A few weeks later an here it is in my mail box! Thank you to Ken and his team for being part of a great company! As soon as I get to shoot again, and install this product I'll be back for my comments on the device itself.
Date Added: 10/09/2013

| Michael Klinger 23-05-2018 16:37

I bought this muzzle brake for my Winchester Model 70 in the 300 WSM. With the barrel being only .590 at the muzzle I was afraid of having a gunsmith turn the barrel down for a 1/2x24 TPI muzzle brake to be put on. So I ordered the Witt clamp on brake and what a surprise. The break is very easy to apply on the barrel, comes with instruction and Witt even emailed me instructions prior to getting mine in the mail. I use to regret going out and sighting in the 300 WSM at the range. Now it has a recoil less then a 243 caliber. Very pleasant to shoot.
One more thing, Witt's clamp on muzzle brake after mounting did not change the point of impact on my 300 WSM.
Love it, highly recommend it to anyone looking for a nice looking, working muzzle brake.
Date Added: 10/15/2013

| Thomas Flores 23-05-2018 16:35

Just received my MB1 and mounted it onto my Mossburg ATR .270. Fit like a glove on the end of my barrel. Took it to the range the very next day and WOW!, what a difference. I was shooting Ted Nugent 130gr. Polymer Tip TTSX Boattail Ammo and was amazed of how much the MB1 took off the recoil. My guess would be at least a 65 - 75% reduction in recoil. Normally one box of 20 and my shoulder is toast. Now going through 3 boxes (60 rds) with no problems. There was also no loss in accuracy at 150 yards. Shopped around for several weeks on the internet and glad to have found this muzzle break. The craftsmanship Witt Machine put into this product is superb! With a 'In case of measurement error we do re-cut the brakes at no charge' guarantee this is a company that is ready to take care of their customers. American made, a guarantee, and great customer support why would I waste my time and money on anyone else. Planning to purchase an AR15 Muzzle Rise Eliminator for my CMMG. I recommend this muzzle break to anyone wanting to reduce the punishment on their shoulder and looking for an reasonably priced American made product.
Date Added: 10/29/2013

| James Osborne 23-05-2018 16:34

Got my MB1 last week and am very happy with it. They had it out to me in less than a week.
Works as described, and the USA made quality is there. Great folks to work with.
Date Added: 10/31/2013

| Keith Hershberger 23-05-2018 16:31

Ordered 2, 1 for a .308 & 1 for a 30-06, both for Savage Axis models. Service was 10 stars~Had them in less than a week & a perfect clamp on fit. Shot both last week & was surprised at the recoil effect. There was not any & felt like shooting our .223 rifle, made pussy cats out of the both and the 30-06 with 220 grain thumper load was smooth. The reason I got them was for my small 5-2 wife to be able to trigger anything we have. She can handle a .338 Lapua with a brake so brakes on all. VERY SATISFIED.
Date Added: 11/05/2013

| Michael Anderson 23-05-2018 16:30

WOW! is all I can say. I have a 300 weatherby magnum that "kicked" like a mule, and I say kicked because now after installing the MB1 clamp on muzzle brake the recoil is about like my mini 14. Very easy to install and looks great on the gun. I am "VERY SATISFIED" I would suggest you try one your shoulder will thank you.
Date Added: 11/06/2013

| Cole Johnson 23-05-2018 16:30

This muzzle brake is VERY NICE!!! I received mine two days ago for my 300 wsm. the gun kicked bad, it had a synthetic stock so it was very light. I couldn't group my shots at all. After the brake was on I put 3 rounds within a half inch at 100 yards. It felt like I was shooting a 270 if not smaller. Very impressed with the machine work. It fit perfectly. I would recommend this to any one.
Date Added: 11/11/2013

| Jesse Tlachac 23-05-2018 16:29

I just bought one of these brakes for a Remington SPS tactical chambered in .308 and couldn't be happier. Being that I have a torn labrum/rotator cuff in my shoulder, it was certainly apparent when my arm didn't feel like falling off that there was a significant reduction in recoil. I was also able to spot my rounds hitting the target even at a relatively short distance with no change in the point of impact. This is the first time I've ever used a muzzle brake before and I certainly don't think I'll be going back.
Date Added: 11/14/2013

| Scott Gaines 23-05-2018 16:28

Bought one a couple weeks ago. I must say the product looks great on a gun. I can't report on the reduced recoil yet because I broke a screw while clamping it down. I had to send the brake back to Ken so he could fix it. I can't say enough about the customer service. Repaired and shipped the brake back to me in time for this weekend's deer season. Thanks to Witt Machine for providing such a great product and service!
Date Added: 11/15/2013

| Mike Lee 23-05-2018 15:48

I bought this break a few weeks ago but just barely shot my gun with it today and it is amazing. The service of Witt Machine alone was awesome, I had my break within 3 days of ordering and it fit perfect the first time. Took it out today and recoil alone was reduced probably 70% on my 300 Win Mag. Before the break my muzzle would jump a good 4 inches off the ground making quick follow up shots impossible and I would have a dead arm after about 6 shots. With the break my muzzle doesn't jump at all and the recoil is hardly noticeable now. I'm really impressed with the difference it's made.
Date Added: 11/17/2013

| james reamey 23-05-2018 15:47

I put this on my Heavy barrel, long range sniper rifle in 7.62x51mm. Man, its like the difference from night and day. Reduces recoil to where I can see bullet impact through the scope and make quick follow up shots! High quality, rugged and easy to install. Jim Reamey, Grove Hill, Virginia.
Date Added: 11/20/2013

| Matthew Suter 23-05-2018 15:46

Awesome job Witt Machine!!! Five days after placing the order, my new brake arrived and I couldn't wait to try it out. It installed in 5 minutes and I was at the range on my lunch break. My 7mm Mag. was miserable to shoot a 168 gr. bullet at 3000+ fps. A real bruiser. Now it feels like my 30/30. It also shrunk my groups to 3/4". I could shoot it all day now. I love the results, simplicity, accuracy, service, quality, and low price. Companies like Witt are rare. Just go ahead and give them your money.
Date Added: 11/25/2013

| chris Tilley 23-05-2018 15:46

Purchased the clamp on muzzle break for my son's remington 700 Win Mag awesome results. He shot it prone over dirt no dust making a follow up shot quick "if needed"? Break looks very nice on rifle and recoil feels more like a .243. Thanks Witt Machine team for the great work. Already told others about your great service and thank you Ken for giving your time as a Marine, Semper fi !!!
God Bless chris CA
Date Added: 12/16/2013

| Joel Bell 22-05-2018 22:16

I recently purchased my MB1 for my .338 Win. Mag. Even with the holidays, Ken had my brake on my door step in five days! I had it installed on my rifle within ten minutes of receiving the package and installation could not be easier. The cerakote finish is great. The fit is perfect and the function is amazing. My first trigger pull using this brake completely blew me away! This rifle did not move on the bag! AT ALL! It feels like a .243 on the shoulder. Recoil was reduced to a simple "push" against the shoulder. This rifle would leap out of the front bag before and kick like a mule! The best part first and only two rounds fired, punched one hole in the paper measuring .407 inches. Keep in mind this round measures .338 inches! In my opinion, Ken Wittekiend has NAILED this thing!!! If you've been skeptical.....DON'T BE! This is a great product at a great price, and best of all, it doesn't require having threads cut on your barrel. Thanks Ken! I will be purchasing more of your fine product!!
Date Added: 01/12/2014

| Robert Littlefair 22-05-2018 22:15

got the brake in the mail today, the fit is snug no were is there any looseness good fit. it really works reduced recoil and muzzle jump a lot. going to have one made up for the sks 56, will buy 2nd one for my nagent this one is on my 1st rifle, glad I found this shop to do business with....
Date Added: 01/18/2014

| Casey Reed 22-05-2018 22:15

I got this brake for my DPMS LR-308 fluted Stainless 24" barrel and it stopped the bounce/recoil off of target, so I can now see the bullet hit the target when shooting at 100yds. Amazing! Great quality !! Really well thought out and engineered !

I just ordered one for my .308 FN-PBR that hops right off the target, but I bet it won't for long.

Thank you very much,
Casey Reed
Date Added: 01/19/2014

| Eric Ritchey 22-05-2018 22:14

Awesome fit and the cerakote finish matched my rifle perfectly can't wait to get out and send a few rounds down range.
Date Added: 03/06/2014

| Izak Nieuwoudt 22-05-2018 22:14

Fits perfectly and dramatically reduced recoil. The reduced recoil significantly improved long range accuracy. I have recommended this product to others and will certainly put it on all my rifles.
Date Added: 02/28/2014

| Corey Courts 22-05-2018 22:13

Recently bought a clamp muzzle brake on for my remington 700 tatical, and must say its a perfect fit and has a great reduction in muzzle lift and recoil. Would hightly recommend.
Date Added: 02/23/2014

| Jonathan Domena 22-05-2018 22:13

I mounted it on my savage axis .270 because of the muzzle kick my son and I experienced. We are hitting bullseye's @100yds now without having it jump out of our hands. This muzzle brake tamed this rifle beyond what I could have imagined and makes it fun to shoot now!
Date Added: 02/08/2014

| Jeffery Langford 22-05-2018 22:09

Just ordered and received a clamp on muzzle brake for my 270WSM. Previously it kicked so forcefully that it was no fun to shoot. I got the brake early last week, installed it per the instructions that were very easy to follow. Very tight and great fit with no movement. Took it out this past weekend and it has much less recoil and bounce and I can see the bullet hit the target at 100 yards. Very good design and a high quality product. I would recommend this to any shooter with any caliber. I have now ordered one for my 325WSM. Thanks
Date Added: 01/28/2014

| Jeffrey Lary 22-05-2018 22:03

Ordered an MB-1 for my Mossberg MVP Varmint. It took only two weeks from order to delivery and it fits like a glove on the 24" fluted bull barrel. Can't test it out until the weekend but I'm very impressed with Witt Machine and their work.

Jeff Lary
Date Added: 05/02/2014

| Phil Tong 22-05-2018 22:01

Finally got to try out my muzzle brake, Awesome Job Fits REAL nice and it doesn't seem to put my 300 Mag out of balance. Need to save up my pennies and get two more!!Thanks Witt Machine !!! 05/19/14
Date Added: 05/19/2014

| Willaim Beckwith 22-05-2018 21:59

My son loves your muzzlebrake. While firing his Rem 700 Police in 300 win mag with a handload 208 gr. Amax @ 2889 fps noticed a big decrease in muzzle rise and recoil. Recoil was less than his 308 win. What an improvement. He was able to shoot 50 ronds with no problem. He can't wait to put one on his Rem 700 police 308 win. and his Win Model 70 Xtr Mag in 300 wi mag. Will recommend your muzzle break to all of our Family and friends.
Date Added: 06/09/2014

| Earl Brown 22-05-2018 21:58

I received my clamp on muzzle brake for a 91/30. Surpassed my expectations, well machined, beautiful finishing work. SIGNIFICANTLY reduced recoil and muzzle rise, the precise reason I bought it. Works as advertised. On another note, makes the old pig look pretty bad ass.....
Date Added: 06/11/2014

| Scott Jacob 22-05-2018 21:58

I think 60% recoil reduction is selling your product short! I installed the clamp on brake on my Ruger M77 MKII Ultralight in 7mm-08Rem. Because of the light weight and short thin barrel, it smacked your shoulder pretty hard. In my opinion, a bolt action .223Rem has more recoil than my little Ruger does now.
Date Added: 06/19/2014

| Michael Varela 22-05-2018 21:57

I recently purchased this product for my TC Venture chambered in .300 win mag. After installing this product I have a slightly smaller shot group, reduced recoil to about a .243 Winchester and I am able to maintain sight picture after recoil. I have a small video on you tube. You can search Witt Machine. I highly recommend this to everyone that has a heavy hitting rifle and even the smaller bore rifles. I plan on purchasing another brake for my .223 so my son can enjoy shooting too. Thanks Witt Machine!
Date Added: 07/11/2014

| Sean Krecko 22-05-2018 21:57

I ordered the clamp on muzzle brake with the black cerakote finish for my Savage 110 in 30-06 because the muzzle would climb almost 8 inches every shot. After receiving the product in only 5 days, it took 5 more minutes to install and I let the thread lock set for another 45 minutes. I put 4 rounds through it as quickly and accurately as I could and myself and the group I was with were dumbfounded. The muzzle jump was reduced by almost 90% and the felt recoil was like a bolt action .223. For the first time I could see the round impact the target. And my grouping even went from a 1/2 inch at 100 yds to a 1/4 inch at 100 yds. Amazing and highly recommended product. I would even let a novice shooter fire this rifle with no concern.
Date Added: 08/04/2014

| Paul Ammann 22-05-2018 21:56

I don't usually take the time to come back to a site and write a review but I just had to in this case. Received my clamp on brake for my .223 Super 14" T/C Contender and man what a difference. Barrel used to hop up and could never keep eye on target after the shot. Now, it just pushes the barrel back slightly and no muzzle rise! Install was perfect fit!!!
Date Added: 08/31/2014

| Michael Bond 22-05-2018 21:56

I have surpassed 1000 rounds of ammo through this brake and I have YET to have an issue. Absolutely love it and have a lot of people ask where I got it. Incredible quality, looks great, and functions perfectly. Highly recommend.
Date Added: 09/16/2014

| C. Michael Herbst 22-05-2018 21:55

Works great. Installed on a Weatherby Axiom that shot well before. Usually .75 at 100 yards, now it's one jagged hole. Thanks Wittmachine, I'll be ordering another before the end of this year.
Date Added: 09/23/2014

| matias manasseh 22-05-2018 21:55

I'm very pleased and satisfied with this product, I am a small frame person with height 5'08"and only weight 125lbs, with this muzzle brake I don't really feel the kick on my .308 riffle,I'm ordering another one for my .270Win riffle
Date Added: 10/05/2014

| LARRY BROOKS 22-05-2018 21:54

I am very pleased with the effectiveness of this Brake on my 300 win mag. recoil is reduced as advertised or more like a 223 or 22 mag. Just installed one on 12 ga mossberg 500 for multiple quick recovery shot placement for home or other attackers.
Date Added: 10/05/2014

| Mark Beaubien 22-05-2018 21:54

I bought an MB1 for my 300 Win Mag. It was nothing short of amazing. 60% recoil reduction may be an understatement. It feels like my 308.

I liked it so much that I ordered another one for my 458 Win Mag.
Date Added: 10/15/2014

| matias manasseh 22-05-2018 21:53

I bought my first clamp on muzzle brake for my.308, I'm small frame weight only 125lbs, with this product I can shoot as much I can no problem this is very valuable addition for any riffle, also bought second one for my .270 which is kick me real bad but with this muzzle brake it kick lil bit but not hurting me at all I really recommend this for all of you who looking for to reduce recoil and muzzle rise,accuracy also imrove, very satisfied
Date Added: 10/25/2014

| Jonathan Murr 22-05-2018 21:53

I love my new muzzle brake, it fit the barrel perfect, a little tight but thats the way it needs to be. The milling of the brake was done very well it only had a few small burs in the top ports which was not a problem at all. I put it on a Savage 7mm-08 and the recoil is all but gone, there is no muzzle rise period. But one thing you will have to re zero your scope it does change the bullet path. I will buy one for all my larger caliber guns in the future. Thanks Witt Machine for a great product.
Date Added: 10/26/2014

| alex littlecreek 22-05-2018 21:53

This is an outstanding item. Installed my muzzle break on my 300 win mag. Shot it yesterday and actually could handle the recoil from a whole box of bullets, with no problems. Shoulder isn't even sore in the least bit. Glad I purchased this item. Spot on @100 yds with 1/2" group.
Date Added: 11/21/2014

| Daniel King 22-05-2018 21:52

I purchased one of these clamp on brakes for my Winchester Model 70 in .300 Win Mag. It was a great gun before but the kick from it was merciless. I must confess that after I put that thing on my gun it was a pleasure to shoot. Frankly, I still cannot believe that much recoil could be taken out of the gun by this little widgit. My gun shoots like a 30/30 now. Still have the big power, but without all the pain. Put a new scope on the rifle and sighted it in without any trouble (or even a wince). Get one of these!
Date Added: 11/24/2014

| Darren Morahan 22-05-2018 21:51

Ordered a clamp on for my 300 Win Mag. WOW. Fit was spot on and looks good. Feels like a 243 or even less and close to my 223 bolt (make sure you wear ear protection - ears still ringing!). Considering one for my 270 but yet undecided as recoil is not an issue but would make it more pleasurable to shoot. Also considering a Witt brake for one of my AR15s just to see the difference. Awesome product Witt Machine.
Date Added: 12/02/2014

| Patrick Stankus 22-05-2018 21:50

I love to shoot my savage 112BVSS in 300winmag its an extremely accurate rifle,but WOW what a huge difference when i installed my MB1 brake. This rifles recoil was cut down to what my Howa 1500 varminter in 22-250 recoils like. Point of impact did not change, groups have been made smaller this brake ROCKS, one awesome piece.
Date Added: 12/03/2014

| Aaron Pennington 22-05-2018 21:48

Installed my new clamp on brake today on my Rem. 7mm mag. All I can say is WOW. About 4 or 5 shots is all I used to be able to shoot. Just fired 10 rounds and felt nothing. I actually enjoyed shooting my gun. It fit perfectly also. Great product!!!!
Date Added: 12/26/2014

| Jerry Bernaud 22-05-2018 21:48

I installed the clamp on brake on my .338 Win-Mag, made a BIG difference, before I would shoot four or five rounds and put it up, now no problem..ran 15 (all I had loaded) rounds and could have shot that many more. It cut the re-coil way down, also did not really notice that much louder, did see fire out the sides. Before every time I shot the recoil would throw everything off and I would have to re-set for Second shot, now it comes back on target without problems. Really took the jump out. If you have a big shooter get one of these, they work and look good.
Date Added: 01/03/2015

| Ryan masillo 22-05-2018 21:47

I put this clamp on muzzle brake on my Remington 700 sps (.308)tactical and the fit and finish was top notch. Then I took it out to the range and WOW. Im gonna say it kicks just a little more them my AR15 but not much. Worth every penny and i will be sure to shop with WITT again.
Date Added: 01/09/2015

| eric smith 22-05-2018 21:47

I bought the mb1 muzzle brake for my 308 absolutely love it made it look customized and will be ordering Another one for my 7mm I gotta say one thing about witt machine you get craftsmanship work for a reasonable price.comment by Eric Smith on 1-10-2015
Date Added: 01/10/2015

| Kyle Langford 22-05-2018 21:46

I was a bit skeptical about some of the testimonials before ordering, but I figured it was worth a shot. The rifle I ordered the brake for was a Remington 700 LR chambered in 300 Win had a "hefty" recoil to say the least. After installing this brake, I couldn't wait to get to the range. After the first round fired, I was astounded...felt recoil was similar to my .243. Pleased is puttin it mildly, I was thrilled with the reduction...I don't believe the claims of a 60% reduction is exaggerated at all. I'm typically not a person who writes reviews, but I was back here on the website ordering another brake for my brothers savage chambered in 7mm Magnum, and I thought it was well worth the time to leave a positive review for something that works as well as this product does. I can't wait to see my brothers face after our first range trip after we get his installed...that 7mm kicks like a mule in his extremely light weight rifle.
Date Added: 01/25/2015

| Tony Jarrell 22-05-2018 21:46

I couldn't wait to get this break on my 444 caliber.The gun took a doe deer earlier in the season,but because of the muzzle jump I like to have missed her.After I installed the break as instructed in the directions it performed beyond my expectations.The 444 now groups shots better and reduced the kick greatly.Witt Machine has produced a great product.I would recommend it to every shooter and hunter.Thanks again.
Date Added: 01/27/2015

| Jamie Mayne 22-05-2018 21:45

Bought it for my .308, best investment ever. Dramatic recoil reduction, and muzzle rise. Truly think it has less kick than my 20 gauge now! Definitely recommend.
Date Added: 01/28/2015

| Randy Barlow 22-05-2018 21:44

I just received my muzzle brake and it was very easy to install, My Neck is Broken in Three places and I Shoot a .270 and I was getting Recoil shy and wanted to keep the rifle and Thanks to Witt Machine I am able to keep the rifle, It now recoils like a .223 or a .222 it is beyond all of my expectations. Took it out with my neighbor and it was Amazing my neighbor thought that I had reloaded a Light Load and put in the rifle when he shot, My neighbor is sold on this Muzzle Brake and he plans on buying one for his Rifle. I will Recommend this product to everyone that I know.
Date Added: 01/29/2015

| Mike McBride 22-05-2018 21:44

I was skeptical but decided $110 wasn't too bad if it didn't work. Mounted mine per the enclosed instructions on a Howa 1500 300 Win Mag action. At the range, the POI changed about 1/2 in low and right at 100 yards. Minor scope adjustment and back dead on. Significant reduction in recoil and muzzle flip, easy to stay on target for followup shots. Shoots like my 22-250. Very happy with this product. Note: Had to tighten the screws to 10 in pounds as apposed to the 8 inch pounds in the instructions with no issues. Thanks for saving me $200+ and waiting on a gunsmith.
Date Added: 02/08/2015

| James Buttz 22-05-2018 21:43

Put on my sons 308 wow looks great but works awesome.
Date Added: 02/17/2015

| Wes Colby 22-05-2018 21:42

I'm using their clamp-on brake with a Remington 300 win mag. Difference is truly NIGHT and DAY! Felt recoil is less than an AR-10 .308. Without it, the bipod would jump to the left about 4-5 inches...with it, zero jumping around with glass still right on target.

Clearly one of the most impactful additions to any weapon system...totally different gun! Thanks Witt Machine!!
Date Added: 03/16/2015

| Eric Tracy 22-05-2018 21:41

Installed on a Browning BAR Longtrac 7MM Magnum
I hated the gun before, kicked like a mule. Now enjoyable and recoil like a .243 or less.
Date Added: 03/19/2015

| Matthew George 22-05-2018 21:39

Placed brake on my 300 Weatherby and finally was able to break away and shot it today, I then shot my .308 for comparison. With the brake in place the 300 Weatherby was easier and more enjoyable to shoot. My rifle was sub MOA before I put the brake on it and remained so after placement. The main difference was the decrease in muzzle jump and recoil, I was shocked at the decrease in recoil.
Date Added: 03/20/2015

| Michael Rivest 22-05-2018 21:38

Purchased a clamp on brake for my 300 Win Mag and am VERY impressed to say the least. Easily reduced recoil and muzzle jump to be compared to my 243. Grouping now is tighter than ever possible before. Less recoil = More Confidence on range and in field. Will recommend to anyone who is on the fence of buying one.
Date Added: 04/06/2015

| RICHARD TROYER 22-05-2018 21:36

I'm a left handed shooter because my left eye is dominant. I had a pacemaker installed on my left side a few years ago. Recoil from anything beyond a 22 magnum is a threat to the device and the wire attachments. I got a CX4 Storm in 9mm in hopes that the recoil was mild enough. Even with sub-sonic ammo the recoil was concerning. I ordered the MB1 and it did the trick! It's really nice to have the option of home defense with a carbine again. Bravo to Witt Machine!
Date Added: 04/24/2015

| Mark Perkins 22-05-2018 21:36

I ordered the MB1 for my T/C Encore with a .270 barrel. This handgun kicked like a mule. I took before and after videos, the results are amazing. I need to edit them before I submit them but it's easy to see the difference. My muzzle rise when for 10 to 12 inches down to 2 or 3 inches. It is also easy to feel the different. I was shocked. The sound is a lot louder but that is to be expected. I can't say enough good things about this product. Thank you Witt Machine. (I do not see and option for uploading videos, is there one?)
Date Added: 04/24/2015

| Felix Lee 22-05-2018 21:34

Finally took my rifle w/ this Clamp On Muzzle Brake installed on it, out to the range. I immediately noticed a reduction in felt recoil, now able to easily stay on target and see where my shots go. Initially, my concern was the possibility that it might come off during my shooting session, but fortunately that didn't turn out to be the case. My rifle is definitely now more enjoyable to shoot.
Date Added: 07/02/2015

| Christopher Bates 22-05-2018 21:33

Absolutely Awesome. Mounted on Remington 700 Long Range in .300 Win Mag. It does what it says. Cut felt recoil in at least 1/2. Three buddies on the range shot it and could not believe the difference. One even said (before he shot it) who cares if it works, that looks badass. Buy this.
Date Added: 07/04/2015

| Ahmad Howard 22-05-2018 21:33

My biggest problem with every rifle ive ever owned has been muzzle flip. From 30-6 to 7mm I was looking for a cure. So I decided to test out a clamp on break on my 243. I know I know small caliber rifle considered to have little recoil. But I still had a bit of muzzle flip. I ordered my break got it early followed directions o install. Didn't get to test for a couple days due to weather. But today I tested it out and all I can say is WOW!! the reduction in recoil and muzzle flip was remarkable!! Accuracy was better than before with less recoil and muzzle flip I re zeroed at 100yds and now own a tack driver. Thanks Witt Machine and I will be ordering again in the near future.
Date Added: 07/07/2015

| Kevin, Jr. Buzard 22-05-2018 21:32

I got one of these for my Ruger American in .308. The quality is first rate and despite my doubts this thing WORKS! It works so well my buddy bought one for his Howard .300 Win. Mag. and now his buddy is buying one for his .338 Weatherby Mag. Thanks for an awesome product, it truly is worth more than you charge. Keep that price low for me though, I have a very full gun safe with quite a few that need a little recoil management.
Date Added: 07/07/2015

| Craig Barker 22-05-2018 21:32

Very nice, high quality. You have to see one in person to appreciate it. I liked not having to leave my rifle with a gunsmith for weeks or months to have the barrel threaded for a brake. This one's for a .338 Win. Mag. I will be buying another for a 35 Whelen soon. Thanks for a nice looking and well operating brake.
Date Added: 07/09/2015

| Robert OBrien 22-05-2018 21:31

I put this clamp on muzzle brake on my Ruger American in 7mm-08, tried it out today and WOW it now has less recoil than my M4. My kids will be pleased and I will be putting one on my 7mm Rem Mag as well. The MB1 is a great buy.
Date Added: 07/15/2015

| ernest hashizume 22-05-2018 21:31

The MB1 is great! Am 82 and cannot handle heavy recoil, but just shot 7 shot MOA group without a shoulder pad. Will soon order MB1's for two 30-06s and one 308. Would like to subscribe to your newsletter.
Date Added: 07/16/2015

| James Anderson 22-05-2018 21:30

I needed a muzzle brake on DPMS 308 24" Bull Barrel to reduce recoil. A notable differance. I going to get another for my .223 bull barrel. Received it less than 10 days.
Date Added: 07/20/2015

| Mike Williams 22-05-2018 21:30

I was absolutely delighted with this brake. It was machined to perfection, eliminated muzzle rise altogether and reduced recoil by at least 60%. I'll be ordering additional brakes for my larger calibers.
Date Added: 07/26/2015

| Freeman Reed 22-05-2018 21:29

Works great. I installed this brake on my 300 Weatherby following the instructions provided. At present I have fired about 105 rounds through this brake without any problems. Using a basic rifle rest and hand loads my rifle would shoot 3 hole groups at 100 yards before installing the brake and still shoots 3 hole groups. The POI changed about 1/8" to the left after the brake install. The fit and finish on the product I received is excellent.
Date Added: 08/01/2015

| John Barrett 22-05-2018 21:27

Received my muzzle break a couple days ago. Installed it on my 30.06 and all I can say is wow! My recoil has been cut in half and no more muzzle rise. You guys did a beautiful job on this product. I will definitely be recommending you guys! Thanks again!
Date Added: 08/17/2015

| Corey Warren 22-05-2018 21:26

I was a little nervous purchasing a bolt-on muzzle break at first, but after reaching out to Witt Machine with a few questions, they put my mind at ease with a quick and clear response. I am very happy with my purchase of Qty 2 custom designed muzzle breaks from Witt Machine. The muzzle breaks fit my Mossberg 308 and 3006 rifles perfectly. Ken and his team make a great product. Highly recommend!

Date Added: 08/18/2015

| Bill Gohring 22-05-2018 21:25

Tamed the Beast.......I received my Witt Machine clamp on brake yesterday. I kid you not it took my .300 Weatherby Vanguard shotting 208 Amax down to .243 levals. I'm truly amazed that $ 95.00 would make such a difference. I will be setting up more of my rifles this way....
Date Added: 08/22/2015

| Glynn Sirmans 22-05-2018 21:25

Have bought my third muzzle brake for bolt action 223 Remington with 18inch barrel.
Scope stays on target during recoil. (really can't call it recoil) Very pleased, fun to shoot.
Date Added: 08/22/2015

| jack hayward 22-05-2018 21:24

I have 3 1 on a 7 mm mag 1 on a 30-06 and 1 on my wife's 243. i cam not say enough good things. It made my 7 mm mag fun to shoot.i just ordered 1 for my new 300 mag cant wait tell it comes
Date Added: 08/30/2015

| Mike Strait 22-05-2018 21:23

Super fast production and shipping. Awesome customer support. I installed my muzzle brake and put the rifle away. Finally had a chance to take it to the range. Zeroing the rifle took 7 rounds with a new scope. Re-acquisition of the target is extremely easy now. Virtually no muzzle rise, and felt recoil is greatly reduced. I highly recommend!
Date Added: 08/31/2015

| Kevin Almeida 22-05-2018 21:23

Just ordered the clamp on brake for my Savage FC10/110 308 HS precision 24" barrel with accu-trigger. Amazed at the build and delivery time. Installed it as directed and went out and shot it the next day. I'm guessing at least a 50% recoil reduction if not more. Instead of the barrel flipping off to the right, it came right back and my view acquisition was so much faster and nice. As I re-zeroed my 308 at 100 yards using Black Hills 175 grain match HPBT, my final 3 shot group were darn near in the same hole. I'm super glad someone told me about Witt Machines. I'm very happy with my new muzzle brake and it's a lot more enjoyable to shoot. Thank you.
Date Added: 09/02/2015

| David Daly 22-05-2018 21:22

I have 3 of these. One on a .270 Remington 710 bolt action, one on a Remington 30-06 model 770 and lastly one on my Bushmaster AR-15 (.223/5.56). I immediately noticed a major reduction in felt recoil, especially on the '06 and the .270. Also greatly reduced muzzle rise on all 3. Faster returns getting back on target, and excellent accuracy. Fit and finish are excellent! Easy to install. I would strongly recommend these to anyone looking to reduce recoil and muzzle rise. I am now thinking of getting one for my Benelli M2 tactical shotgun.
Date Added: 09/04/2015

| Frank Young 22-05-2018 21:22

First I am on blood thinners for a heart condition so I worried about recoil on my 7mm Rem Mag. With this muzzle brake I don't even think about the recoil anymore. It is truly amazing. I highly recommend this brake to everyone
Date Added: 09/05/2015

| Gary Edmonson 22-05-2018 21:21

I enjoy slapping the steels around with a 1903 Springfield "sporter". Problem - the recoil was enough to lose my view of the target for at least half my shots, even with a low power scope. I decided the MB1 clamp on brake might be worth trying. Problem solved! The recoil reduction was dramatic. The old .30-06 feels more like a .30-30 and I can now see the impact points of every shot. The MB1 installed easily, looks and works great. It even arrived about a week earlier than expected. I'm impressed!
Date Added: 09/06/2015 by

| Chris Smith 22-05-2018 21:19

Congratulations! You broke my 300 win mag and I cant be happier! My shoulder used to hurt after 10-12 rounds. Now, I giggle! Made shooting it fun! Fit was tight, but it was well worth it. Thank you for an amazing product!
Date Added: 09/16/2015

| Charles Broeder 22-05-2018 21:18

Purchased an MB1 in June and just now got to shoot my rifle. It is a Remington 700LSS in 300RUM. Been shooting my reloads and now the recoil is less than my 30-06! My groups tightened up 1/2" also. Very pleased with the product. Can't wait till hunting season!
Date Added: 09/16/2015

| Richard Carter 22-05-2018 21:18

this is my second Clamp on from Witt and its on a 300 win mag . it does work very well and even my baby girl all 98 lbs now loves my long range rifle. thanks for a great product that does what you say it does
Date Added: 10/01/2015

| garrett bracken 22-05-2018 21:18

Ordered this for my .300 Remington Ultra Mag. Needed something to reduce the recoil because it kicked extremely hard, especially with my handloads. First shot after installation I was so happy, it literally kicks less than my AR15. That's about 5,000 foot-pounds of energy with a 208 grain bullet and it feels like a 5.56. I love it. Great work, perfect fit. Didn't change PoI either.
Date Added: 10/02/2015

| John Blundell 22-05-2018 21:17

Absolutely the best product I have ever purchased for any of my guns!!! I have a .270 short mag that was not fun to shoot anyone who owns knows how brutal the recoil is. I would 3 rounds and have a bruise for a week. I installed this clamp on muzzle brake shot 25 rounds at the range today and I don't even feel it. This gun has become a fun rifle to shoot. Thanks witt machine.
Date Added: 10/04/2015

| Keith Bartsch 22-05-2018 21:15

Put this on a Browning A-bolt in 30-06. Wanted to own a reasonably powerful rifle young folks and those afraid of recoil could shoot accurately to introduce them to whitetail hunting. Witt clamp-on brake fit the bill perfectly. Installation instructions were simple, install was a snap and it did not diminish accuracy. The black cerakote matched the barrel finish nicely. To me, felt recoil is now substantially less than with a .308 bolt rifle. Kinda wishing now I hadn't spent much more to have barrel threaded and custom brake made for 300 WIN MAG.
Date Added: 10/06/2015

| kelly napper 22-05-2018 21:13

Witt Machine is a TOP NOTCH outfit. I received my break for my 220 Swift and installed it and took it out for ranging. I was TOTALLY pleased in every way with the product and the company and it DOES WHAT THEY CLAIM. Thanks Witt for everything. Ordering my second break for my 25/06 at this time.
Date Added: 10/16/2015

| Kevin, Jr. Buzard 22-05-2018 21:12

Purchased my MB1 and followed the instructions for install. Wish they included the loktite but the small amount extra I spent was worth it. HUGE difference in felt recoil. My buddy and I have Ryder Americans in .308 and there is a big difference from his to mine. Let another friend shoot my .308 and he liked it so much he bought one for his 300 win mag. Loves his too!
Date Added: 10/17/2015

| christopher Sliger Sr 22-05-2018 21:10

my wife just got me a clamp for my 7mm08 man what a different make Is like shooting a AR 15 it is great very mild on recoil now deer look out
Date Added: 10/20/2015

| rod knight 22-05-2018 21:09

8 days for delivery to NSW Australia.
Perfect fit to Tikka lite T3 308 .
308 feels less than a 22/250 bit more than 223
Virtually no muzzle rise looking through scope to target while firing
Light barrel behaves better than bull barrel
155 s 150 rn 130 hp all group together
Amazing difference
Regards Rod Knight
Corowa NSW Australia
Date Added: 10/21/2015

| Darren Wroten 22-05-2018 21:09

Just received my clamp on brake today and installed it.It is absolutely is an awesome product from the craftsmanship to the installation shot a round through it this afternoon it reduced my re-coil by better than half on my weatherby 30.06 but you better put ear plugs in thanks for a great product I will be ordering more.
Date Added: 10/22/2015

| james bridges 22-05-2018 21:08

I purchased three clamp on brakes. For 300 wsm, 338 win mag, & 7mm mag. Turned the recoil for all rifles to that of a 243. Highly reccomended, highly impressed.
Date Added: 10/31/2015

| nakeeya bowman 22-05-2018 21:07

I was at first hesitant to purchase a clamp on brake due to the concern of it affecting barrel harmonics. I finally gave in and ordered the Witt Machine clamp on brake for my .300 RUM, before installing the brake my rifle shot about 1-1.5 inch groups at 100 yards not to mention it recoiled so hard that it would lift the rifle and bipod off the shooting bench. After installing the brake my rifle will now shoot 3 shots touching at 100 yards and does not recoil any harder than my .308 Win. This is an awesome product for recoil control on a budget 5/5 for me.
Date Added: 11/05/2015

| Dean Fleming 22-05-2018 21:07

Bought a T/C Venture 7MM mag with the clamp on muzzle break. The first 10 rounds through the gun I had a groping of about 1 1/2 inches. I would recommend that any one that has a rifle should put one of these on their gun. It will improve your accuracy and improve the comfort from the recoil of the gun.
Date Added: 11/12/2015

| Matt Hawkins 22-05-2018 21:06

Wow is an understatement! This clamp on brake takes my 300 win mag to a level that allowed my wife to now claim it as her favorite rifle. She only weighs 100 pounds and has an AR that she loves. Her first shot was a gong hit at 200 yards and she wanted more.

Witt machine is an awesome company with products that work. I'm spreading the word. Here is a link to the video of my wife hitting the gong.
Date Added: 11/15/2015

| Steve Jones 22-05-2018 21:04

Install MB1 on my daughter 7mm-08 youth model rifel and all I can say is WOW.She now shoots with confident with out the fear of the recoil. Thanks Witt Machine Co for a great product.
Date Added: 12/04/2015

| Fred Pimentel 22-05-2018 21:03

Just tested my clamp on to see about the reduction in recoil. Grant you it is on my T/C .223 with 26" barrel that didn't have much recoil to begin with but now I think my .177 pellet rifle kicks a whole lot more. It will be perfect for recoil shy people that want to shoot center fire. I'll check accuracy later but so far i am impressed. Very easy to install and great support when you call with questions. I highly recommend Witt Machine and their products. Cant wait to try my 7mm-08 and my .308
Date Added: 12/05/2015

| Christopher Bates 22-05-2018 21:02

Purchase the COMB for my Rem 300 Long range. This brake not only looks great, but it is extremely effective. I'd say felt recoil is cut by at least 50%. Purchased a second COMB for a Rem .308. Cant wait to try her out. Excellent product.
Date Added: 12/05/2015

| Paul Piccolo 22-05-2018 21:01

Do to a shoulder injury I Purchased a clamp on brake for my 7mm Rem Mag and am VERY impressed to say the least. Easily reduced recoil and muzzle jump to be compared to my 243. Grouping now is tighter than ever possible before. Less recoil = More Confidence on range and in field. I would recommend to anyone who is on the fence of buying one just do it.
Date Added: 12/08/2015

| david mittlestadt 22-05-2018 20:59

Put your brake on my 300 win mag, fit and instructions were great. Felt recoil is less than my m1a and I stay on target shooting 190gr [email protected] fps. Will/have recommend/ed this brake to my friends. Me and my shoulder thank you. Dave Mittlestadt, Chino Vally, Arizona
Date Added: 12/12/2015

| Thomas Edwards 22-05-2018 20:59

Wow! This product delivers. Fit was perfect with performance to match. Shot the best groups from my Weatherby Vanguard ever. Recommend? Are you kidding me? If you are thinking of adding a muzzle break but are unsure, this definitely is the way to go. No permanent modifications & you do not need a Gunsmith to install. Witt Machine thanks for a great product at a great price.
Date Added: 12/17/2015

| Kurt Carlson 22-05-2018 20:56

I was a little leary about buying the break for my 7mm mag because nobody around here knew anything about the company or their product. Boy was I glad I did. The break arrived and fit like a glove. Just make sure to follow instructions. First day at the range I shot thirty rounds of the 7 mag with no problems of a sore or bruised shoulder. I let a couple of the guys shoot the rifle and they were impressed also. I am so happy that I ordered another one for my 30-06.
Date Added: 12/25/2015

| Johnny Kennedy 22-05-2018 20:47

Purchased one for my long range rig, a Savage 112BVSS in .300WinMag. With rifle in stock form, could only bare 190gn bullets for so long. Recoil was almost unbareable after a dozen rounds, anything more was tiring and accuracy suffered.
Now after installing my Witt brake, I'm up to 208/210gn bullets, putting them on target out to 1500yds, and ACCURATELY! I don't feel like I've been in a UFC fight and run a marathon at the same time now. This summer I'm taking 225gn bullets to a mile and beyond! Thanks for a great AMERICAN product that does what it says. Expect more orders from me and my shooting friends.
Date Added: 12/27/2015

| Kurt Carlson 22-05-2018 20:46

Brought my second break for my 30-06. Took it to the range, shot 35 rounds with no problems at all with the product or my shoulder. Checked it every fuel rounds to make sure it was not loosening up. Follow the instructions and you won't have any problems. Very happy with the two breaks that I have bought. Would highly recommend this product.
Date Added: 12/29/2015

| charles woodard 22-05-2018 20:46

I received my Muzzle Break installed as per instructions then went out to send some lead down range. What a difference, the felt recoil is now less than that of my 30-06, I can now shoot my 300 all day. The accuracy is still sub .5 MOA. Great product.
Date Added: 01/17/2016

| Chad Humes 22-05-2018 20:46

I was kind of hesitant to try a clamp on muzzle break after reading stories of failed attempts of shooters using them, obviously due to their own fault.
My biggest worry was having a Remington 300 Win Mag which most of you know is a very heavy hitting rifle that I wouldn't get good results. Due to a shoulder problem I could never fire more that 20 rounds in an outing, after "properly measuring and installing my new Witt muzzle break I must say I was more that happy "actually blown away" with how well this product worked. $89.00? Are you kidding me?! Dont use this for an excuse to raise the price, but you will never find performance like this for anywhere near that price! Thank you Witt Machine. GREAT PRODUCT!
Date Added: 01/17/2016

| Edward Bonebrake 22-05-2018 20:45

I installed a clamp in muzzle brake in my Remington 300 win mag. The install was easy and the brake was a tight fit. I finally had a chance to sight the rifle in and took it hunting over the last weekend. The recoil was less then my lever action 30-30. I managed to shoot 2 whitetail deer and 2 nilgai antelope and a few hogs without even the hint of a sore shoulder. The muzzle brake gives you confidence that you won't flinch when you pull the trigger. I suggest the muzzle brake to anyone with a high powered magnum rifle. I will buy another when I get my 338 win mag if it's not ported.
Date Added: 01/19/2016

| GERMAIN BEX 22-05-2018 20:44

We ordered this muzzle brake for a FN FAL .308 / 7.62 NATO . Installked it in a few minutes , perfect fitted ( thanks to WittMachine). The results are fantastic : the recoil is really reduced and the rise a naerly away : we can shoot very fast without losing the target . Even in quick fire ( 3 à 4 shots a second we have nice groups ( 3 inch diameter) and 100 nm. e already fired aboiut 2000 buklklets
Really a great job done by Witt Machine. Simply the best
Date Added: 01/20/2016

| Wayne Doebler 22-05-2018 20:44

I have been nothing but impressed with the performance of my clamp on muzzle brake for my Howa 1500 .308. I read some online stories about several people complaining of the brake coming off during testing. I followed the instructions exactly as written and after 500+ rounds down range I have had not a single issue. This is an excellent product! This rifle now recoils like a .223 and is a pleasure to shoot 50 to 100 rounds per range visit with no muscle bruising or soreness. It was exactly what I was looking for. I would recommend this product to anyone.
Date Added: 01/21/2016

| Randall Mutter 22-05-2018 20:43

I got on of these for my T/C Encore Pistol in 7mm-08 and it works awesome! It makes it very tolerable to shoot for extended shooting sessions. Thank you for a excellent product and service. Randall A. Mutter
Date Added: 01/23/2016

| LARRY HINTON 22-05-2018 20:42

I put the clamp on brake on my Savage 300 win mag. I can now shoot the rifle with out
using pain killers. First kill was a coyote at 275 yds. No muzzle jump so was able
to see the critter fall. Love this product,& great customer service so I bought another
for my AR-10. Will next try one on my 375 H&H.
Larry in Texas
Date Added: 02/03/2016

| Jason Bullock 22-05-2018 20:42

For a while I contemplated putting a Witt machine break on my savage 111 in 270 winchester. Its a very light rifle and I was looking to tame the muzzle rise and moderate recoil that light rifle has. Well I ordered the break, cerakoted black. Their measurements for machining where dead on with my supplied measurements, went on tight, and gives the rifle attitude. Tighten it down and kt is going no where its totally secure. The recoil reduction is 60%+ conservatively, in truth feels way more. It does keep the gun planted, and easy to get back on target faster. It was worth every penny, didn't require threading the barrel, or $200 worth of tools, to thread it.l, 1 week from order to the door. This was my first witt machine clamp on, but not last, already have plans for a few more in the future.
Date Added: 02/13/2016

| Harold Carvajal 22-05-2018 20:41

Sent in measurements online got the bad boy on Saturday, took a minute to install on my Remington 300 Win Mag. What a BANG! and accuracy! The folks at Witt are friendly and great customer service, I'm very satisfied, thank you.
Date Added: 02/22/2016

| wade sizemore 22-05-2018 20:41

I got this for my Reminton 700 LR in 300 win mag before I put this on I could only shoot around 20 rounds before I started to pull and finch so my shots would be super off now I will shoot with my buddies long range and can put up 60 rounds down range the only reason I stop shooting now is that I would go broke in a few days of having to spend $30 on a box of ammo overall it's a great product and it makes the gun look sexy!
Date Added: 03/05/2016

| James McCue 22-05-2018 20:40

Well I measured my barrel per the instructions and then waited anxiously for my muzzle break to arrive and took about a week. I followed instructions and mounted it. Of course I don't normally install something like this, so with some trepidation at the range I fired off the first shot from my .308 Howa . Wow It felt like my Ar. I was stunned that it not only was soft on the shoulder but stopped all the muzzle hop that was so annoying. Well I put about 100 rounds thru it so far and am looking to go back again. Great product.
Date Added: 03/14/2016

| James Ott 22-05-2018 20:38

I am rarely impressed, But today I am. I ordered a Witt machine clamp on brake Tuesday of this week. Today ( Saturday) after receiving the brake and installing it ,I shot my gun. The gun is a Tikka T3 lite in .300 win mag. I love this gun as it is accurate and light. The only down side of it was vicious recoil and a lot of muzzle rise. After installing the brake according to directions,it is as comfy as a .270 or maybe a bit less. Accuracy was not changed and point of impact only slightly different.
Thank you for excellent service and a great product that works as advertised.
Date Added: 03/19/2016

| Micahel Valentine 22-05-2018 20:37

I have one of these on my Browning X-Bolt 300 Win Mag and ordered on for my Mossberg 7mm cause it is a very light rifle but have to say the one I put on my 300 Win Mag it has the recoil of a .270 and is very accurate and fun to shoot now that it doesn't have all that recoil behind it Witt Machine has my business forever great muzzle break at a really good price the best out there by far. Michael Valentine 3/26/16.
Date Added: 03/27/2016

| Allen Groves 22-05-2018 20:36

Having this product for some time now and got to put it through some of what I do I didn't think I'd see something that canceled out the muzzle rise of my AR15.Now I'm a believer,I shot this with a mil spec trigger and I only feel the cycling of the firearm,recoil is reduced at least by 50%,that is a estimate nothing with profound data,just a ballpark figure.I did notice a little bit more of a muzzle flash but I know this isn''t a flash suppressor.maybe 2-3 inch signature being thrown out at the 10 o'clock and 2 o'clock.I tried this with a few mag dumps with my bump fire stock,it didn't climb uncontrollably like the original A2.overall great product highly recommend it
Date Added: 04/07/2016

| Alfred Stinger 22-05-2018 20:36

Just received the clamp on muzzle brake for my Ruger AR-556. Fits like a glove !! Nice job Witt Machine !!
Date Added: 04/14/2016

| Dennis Dettwiller 22-05-2018 20:35

Installed the clamp on muzzle brake on a Remington 700 heavy barrel .308. Recoil is like a 5.56 ar-15 and reduced rise by at least half. Rifle was consistently shooting 3/4-1 MOA and the only change was the muzzle brake and is now shooting 1/2-3/4 MOA. Machine fit and finish was perfect and no issues with it coming loose when installed correctly. I will be placing another order to outfit a rem 700 300wm within the month. Thanks
Date Added: 04/15/2016

| tonny french 22-05-2018 20:33

Don't hesitate like i did. Turned my 7mm rem mag into a kitten and tightened that third round up on the range. My browning A bolt had very manageable recoil, however that pencil thin barrel was all over the place after the second round. After i installed the witt clamp i am able to follow through each shot with the recoil of a 22 center fire and muzzle jump is even less than that of my 22250ai. It's so nice to see the impact after the trigger goes off. This won't be my last witt muzzle brake
Date Added: 04/15/2016

| Michael Crills 22-05-2018 20:32

I received the brake put it on my browning a bolt 3 in 300 win mag ( which was a shoulder buster. ) Now with the brake its like shooting a 22-250 very impressed.
Date Added: 04/19/2016

| jeff christensen 22-05-2018 20:32

what a great product made my 300 win mag feel more like a 22-250 no joke.
Date Added: 04/20/2016

| Aaron Barraclough 22-05-2018 20:31

I bought this for a 7mm Rem Mag. It was a perfect fit and reduced the recoil to almost nothing. I don't think it kicks any more than my 22/250. I love it, no accuracy loss at all. My friends saw it and are talking about ordering one.
Thanks again
Date Added: 04/29/2016

| Roger Welborn 22-05-2018 20:30

I live north of Seattle and had a brake installed, tuned etc. It screwed up my timing so much I couldn't develop a workable load. I saw Witt brake on line and figured that I would just return it if need be.
WOW!!! Installed on a custom built 7-08 and actually helped my accuracy and reduced recoil. I truly didn't
think it would work. I am 74, have been reloading for over 50 years and have never had such a surprise.
These brakes install easy and absolutely work. You can not find better people to deal with. SUPURB.
Date Added: 05/19/2016

| Wiley Hardwick 22-05-2018 20:29

I ordered one of these about a week ago and it came in yesterday. I immediately installed it on my Remington 700 in 270 Winchester. The instructions were easy to follow and it fit like a glove perfectly. I took it out today to shoot and put 20 rounds of 150gr. full power hunting rounds and 130gr. full power ballistic tip rounds down range and the muzzle never rose a bit. The recoil reduction and muzzle rise elimination were fantastic. It felt like shooting a .223/5.56 AR. I love this thing and will never need to use a shoulder pad ever again. I am going to tell all my friends about this brake. Thank You Witt Machine
Date Added: 05/26/2016

| eric tarbox 22-05-2018 20:28

T/C Venture compact 308 for wife/daughter. Nobody would thread it for us, so I got this for the Sig Sauer 3 day precision scoped rifle course. Brake was so effective that wife shot 300 rounds comfortably and achieved FIVE FOR FIVE SUB MOA HITS AT 750 YARDS! She ran right next to $3000-$4000 guns and beat several. Instructor Dave Hinkell stated 'not bad for a hunting rifle'. Thank you!
Date Added: 05/29/2016

| Anthony Dacong 22-05-2018 20:27

Great brake. Was a little iffy about a clamp on for my R700 heavy barrel. Fit like a glove and worked like a charm. Huge difference in recoil!!
Thanks Witt
Date Added: 06/03/2016

| Devin Masters 22-05-2018 20:27

Bought one for my savage 338 Win Mag and I'm absolutely amazed. My 6.5 creedmoor has more recoil now. Very well made perfect fit. Will be ordering more.
Date Added: 06/07/2016

| Qingquan Lan 22-05-2018 20:26

Finally decided to buy a brake for my 300 win mag because I do hot loads most of the time, and I dont want to make any mods on my barrel. I do have a limb saver pad on my stock. It does reduce recoils on my shoulder but the scope keeps kicking back every shot. The scope does kick on my forehead sometimes. All the WM brakes custom made just to fit your barrel, so it may take some little time to cut and finish them. After mounted it on, it does improve a little on the accuracy. I did get around .5 moa without this brake in 5 shoot group. Now I am getting around 0.3-0.5 moa group. The recoil tremendously reduced. The velocity increased about 50FPS in my case. Overall this is outstanding product and it looks great and does beyond my expectation. I will come back any buy one on my next custom 338 LM.
Date Added: 06/15/2016

| Brian Assendrup 22-05-2018 20:26

Got one of these a month or so ago for a model 70 338 Win. Mag. and finally got a chance to go try it out. All I can say is Jesus what a difference. Was planning on selling that thing because it was painful, couldn't shoot more than 4 or 5 rounds, now I can shoot it all day, I'll probably go broke feeding the thing ammo. Thanks Witt.
Date Added: 06/30/2016

| Joseph Dindlebeck 22-05-2018 20:25

Wow my 300wm kicks less than my 3006
Date Added: 06/30/2016

| arlen kelley 22-05-2018 20:25

I installed it on a rem 700 308 SPS worked great and it looks even better great job to the people at witt love it !!!!!!!!!!!!!!you will not find a better clamp on brake. PERIOD !
Date Added: 07/05/2016

| Mark Toops 22-05-2018 20:18

Superb workmanship. Well designed product that works as advertised. I purchased the MB1 for a .308WIN build that I did and wanted to stay on target with the scope. This brake eliminated muzzle rise and the felt recoil is nearly the same as my Remington .223. I am very impressed with this brake.
Date Added: 07/09/2016

| Robert Andreasen 22-05-2018 20:18

I purchased the clamp-on muzzle brake for a custom build Reminton 700 SPS Tactical. After installation I immediately noticed close to a 50% reduction in recoil which took this rifle from 1/2 MOA to 1/4 MOA ! Great quality, service and fast shipping...and made in the USA!,
Date Added: 07/12/2016

| Pete Burbank 22-05-2018 20:17

This is one badass muzzle brake !! If your on the fence about buying one...don't it !! I followed all directions, got good measurements, used Loctite blue, leveled it, torqued it to specs. I put this brake on my brand new, never fired, Bergara Rifles B-14 Hunter, 300 Win Mag with a Leupold Mk IV 20 MOA base. On top is an SWFA SS fixed 12X scope sittin on Warne Maxima rings...all leveled out of course. The first shot I was thinking "ok, here we go, am I going to blow this brake downrange?" Well, the shot broke, and I couldn't believe the recoil...or lack of. This rifle kicks less than my buddy's Marlin 30-30, and I also thought his gun was louder too !! Very happy with my Witt clamp on muzzle brake, Blackhorse Veteran
Date Added: 07/17/2016

| Edward Dillon 22-05-2018 20:16

On August 5,2016 I received my MB1 clamp on muzzle brake. I attached it to my Mossberg Flex MVP bolt action 5.56 rifle. WOW !!!, Not only does thing look wicked , it Works!!!......My Mossberg, used to jump all over the place. Now, just a tap on the shoulder. It makes shooting a pleasure.To the folks at Witt Machine, Thank You! You have a great product , well made , great price, I recommend your product to anyone , 5 Stars ,Period.( microphone drop).
Date Added: 08/07/2016

| Jan Grim 22-05-2018 20:14

I bought one for a Mossberg patriot .338 win mag gun only ways 7lbs. kicks like a mule. Installed brake now the gun is like shooting a .243 amazing!! just ordered one for my .300 win mag thanks so much for a great product.
Date Added: 08/11/2016

| Edward Dillon 22-05-2018 20:13

It has been a couple of weeks since I installed my new clamp on muzzle brake. I cannot believe how I let myself shoot my Mossberg 5.56 bolt rifle without this brake. It does not jump at all , just a friendly tap on the shoulder. Just the look of it means business, and it does it's job. To the people at Witt Machine, Thank you, 5 stars period.(microphone drop)
Date Added: 08/16/2016

| Pete Burbank 22-05-2018 20:13

Awesome muzzle brake !! Bought an MB1 for my Bergara B-14 Hunter in 300 Win Mag. Reduced recoil at least in half...still has some recoil, but doesn't try to dislocate my shoulder now ! I don't notice the noise from behind the rifle, and it depends on where you're shooting...enclosed areas, like range bays are louder...the cinder pit we shoot at absorbs sound, so I don't notice any big difference. My friend Bill and I both agreed that his 30-30 kicked more and sounded louder than my 300...Great Job Witt !!
Date Added: 08/17/2016

| shaye bruggink 22-05-2018 20:12

Purchased for a 300 win. mag. shooting 212 gr bullets. Range sessions and long range target shooting are not hindered by a sore shoulder. great product, clean finish. super easy install. Will buy many more.
Date Added: 08/21/2016

| Shane Robbins 22-05-2018 20:12

Awesome !!!! Can't believe the improvement
Date Added: 09/06/2016

| Skip Green 22-05-2018 20:11

Received my brake toady....Workmanship is AWESOME! Fit like a pair of socks, nice and snug without any trouble at all. :D Now I can't wait to go shooting again.
I'm IMPRESSED so far!
Lancaster Ca.
Date Added: 09/07/2016

| Mike Siedsma 22-05-2018 20:11

Ordered the Clamp On brake for my Rem 700 SF Varmint in .308 with the stainless fluted bull barrel, it installed perfectly. Very impressed with the workmanship and finish on it, the look is top notch as well. I took the rifle out today shooting up to 540 yards - and wow! The recoil is knocked back to a .223 or even less. I was able to basically let the butt of the rifle rest against my shoulder and relax everything, the recoil was reduced so much I quickly eliminated any pull or hesitation preparing for recoil. Staying on target after the shot is also much easier, allowing for faster hit identification. What a value this is, thanks Witt!
Date Added: 09/14/2016

| Skip Green 22-05-2018 20:10

Received my Brake about a week ago, and it fit exactly as promised. Went shooting yesterday and it's like shooting a completely diffent gun! I highly recommend this to anyone without a threaded barrel and looking for a brake!
Date Added: 09/16/2016

| James Hall 22-05-2018 20:08

I give this break five stars because it does everything it says. I put this break on a Remington 700 chambered in 7mm rem.mag. before i installed the break this gun had a very nasty recoil. The break was very simple to install and reduced the recoil to less than that of my .30-.30. It makes the gun a pleasure to shoot. I would recommend Witt Machine breaks to anyone who wants to take the "Mule" out of their rifle. Thanks Witt Machine for a Beautifully made product that works so well. And thanks for the great customer service too.
Date Added: 10/01/2016

| derek casey 22-05-2018 20:08

I put one of these on my Mosin nagant. I have a video of a 10 year old having a ball shooting it on YouTube. I have a second one ordered now for my .300 win mag and believe it will do just as good a job as it does on my mosin.
Date Added: 10/04/2016

| CORIE NOLAN 22-05-2018 20:07

I purchased the clamp on muzzle brake for my Ruger M77 .300 win mag. I went with the already pre-fabricated measurements for my rifle that Witt had. I received it quickly in the mail, but was a tad disappointed when I got it as it was to big and didn't fit. I contacted Witt Machine and told them my issue. They didn't balk at all and immediately sent me a new one with the measurements I gave that I took off my rifle. I offered to send the other back, but they told me to keep it. I put the new one on and it fit perfectly. I went out shooting and was very impressed by the reduction in the recoil. I usually leave the range with a sore shoulder, but not anymore!! the brake is well fabricated, and the customer service is outstanding..

Thank for a fine product!!!

Corie Nolan
Date Added: 10/09/2016

| Dennis Dion 22-05-2018 20:07

I installed this on my Remington 700 LR in 300win. The break fit perfect and the recoil wasn't much more than my livht weight 308. Made it a please to shoot and shot 40 rounds with no sore shoulder.
Date Added: 10/13/2016

| richard feindel 22-05-2018 20:06

Installed one of these clamp on brakes on my 7mm mag. What a difference this brake makes.
Date Added: 10/13/2016

| richard feindel 22-05-2018 20:05

Installed a clamp on muzzle brake on my Axis 270. What a difference shooting this rifle now.
Date Added: 10/13/2016

| ALAIN PORTELLI 22-05-2018 20:05

je suis français ,j'ai commandé le 30/09/2016 un frein de bouche non fileté pour ma .300 Wby mag Back country et j'ai reçu cette piece le 13/10/2016.Bravo à Witt machine pour le délai de livraison très correct. Je n'ai pas encore testé le frein de bouche ,mais dès que je l'aurai testé je vous dirai ce que j'en pense .
Date Added: 10/14/2016

| Dwight Mercer 22-05-2018 20:04

I bought a bolt on muzzle brake for my 300 Mag not knowing if I would like it.A lot of friends telling me I would not.I can tell you "Best Thing I Have Done In A Long Time".This is an Awesome piece of work.I have recommended it to friends and family.Matter of fact I am going to order one more for me and my brother once one too.Great Job Guys!!!

Dwight Mercer
Date Added: 10/27/2016

| russell childers 22-05-2018 20:04

I currently own 2 off these now one on a 308 and the one I just bought I put on a 300 win mag this is a great product on the range today I shot 20 rds out of the 300 couldn't even tell it was there
Date Added: 10/29/2016

| Christopher Wood 22-05-2018 20:03

Felt recoil on a long action 284 Win, firing hand loads (162-grain HPBT) at 3K-fps, is now approximately equivalent to my heavy-barreled .243 Win. Maybe even less. Muzzle rise is decreased to the point where I can stay on target through the entire mag of 6 rounds. Fit was perfect. I plan to purchase two more for additional rifles.
Date Added: 11/07/2016

| Chris Keller 22-05-2018 20:02

OK so I was not to sure how it was going to work got it in the mail and put it on just the way they told me I was a little nervous when we got to the range pulled the trigger and it felt amazing loved it is could stay right on target the people next to me did not like it strongly recommend this product going to get one for the rest of my rifles so do it now order your break you won't regret it one bit
Date Added: 11/10/2016

| Joshua Shepherd 22-05-2018 20:01

Shipped quickly and the instructions were very clear and easy to follow.I admit that I thought the claims of nearly 50% recoil reduction were far-fetched, but my .300 win mag kicks about as much as my 30-30, now. I am both surprised and impressed. I am very happy with this product.
Date Added: 11/19/2016

| Bruce Dorn 22-05-2018 20:00

Put this on a Rem 700 in .308 & was amazed at the reduction in muzzle climb. I could see bullet strikes at 100 yds! Recoil was also reduced, but a .308 doesn't bother me. I think it will help at the end of a long match, however.
Date Added: 12/23/2016

| Joseph Dye 22-05-2018 19:59

I bought this muzzle brake for my Remington 700 in 7MM Rem Mag which is now tamed to almost a .243, everyone is surprised at how smooth my rifle is now. I didn't want to fork out the money to have the barrel threaded. My first order I got the measurements wrong, Witt Machine was very helpful and send out a new muzzle brake at no cost. It really says that they stand behind their product and I will buy from them again.
Date Added: 12/26/2016

| seth holbrook 22-05-2018 19:59

My son has a savage axis 30-06 and it kicked like a mad mule until i purchased a brake for it. It reduced the recoil to nearly nothing. It completely eliminated the muzzle jump and shoots fantastic. I am very pleased with the muzzlebrake. Great workman ship !!! I will be getting a brake for every high powered rifle I have !!!
Date Added: 12/29/2016

| richard feindel 22-05-2018 19:58

Have purchased 4 of these clamp on muzzle brakes. One for a 7mm mag one for a 308 and two for my 270s. What a difference they made. I am an older hunter who had become a flincher and these cured that for me.Parkerf
Date Added: 01/13/2017

| MARK ROBERTS 22-05-2018 19:57

Hay guys just fired some full house slug rounds with the Witt's shotgun clamp on and it did make a awesome difference, fit and finish both excellent, just ordered another one for my h&r 12ga. Brake barrel moded shotgun,thanks again Witt's machine
Date Added: 01/21/2017

| troy cook 22-05-2018 19:57

I received my clamp on muzzle brake for my Ruger American 308. I took it out and sot it today, and was amazed. Perfect fit, and substantially decreased the recoil. I put 60 rounds through it, and could have shot more. GREAT product, pride in craftsmanship. Thank you WM&T
Date Added: 01/28/2017

| Glenn Austin 22-05-2018 19:56

I ordered one for my 300 Win Mag TC Encore. It really reduced the recoil and muzzle jump. I can't wait until next season to hunt with it!
Date Added: 01/29/2017

| Carl Shealy 22-05-2018 19:56

Order a custom clamp on for a break for an H&R single shot in 500 S&W magnum. The gift came with 8 boxes of 700gr trex killers. I shot the rifle with that ammo without the break and it only took 3 rounds for me to quit. I shoot 3.5" ids commander slugs out of my 12ga slug gun regularly with no problem. This thing hurt even after I added a decelerator recoil pad.

Came across this break and seen some videos and was skeptical but decided to give it a try. I was absolutely blown away with the legitimate amount of recoil it was able to eliminate from this beast. First range trip with this on I was able to shoot 2 20rd boxes with no problem. 5 stars is not enough for how great this is.
Date Added: 02/04/2017

| Johnny Ray 22-05-2018 19:55

I wanted to wait until inshot over 400 rounds before giving my opinion. What a major difference in the performance of my Rem 308 rifle. Little tough to dial my sight in, but finally got it down. Without the muzzle brake, I would have to readjust my rifle after every shot. With Witt's awesome workmanship on the muzzle brake, I have not needed to reposition after shooting. I'm truly satisfied and my rifle looks great and intimidating...or could be my face. Either way, the muzzle brake is well engineered.
Date Added: 02/05/2017

| Brian Morris 22-05-2018 19:54

Purchased this break for my Rem 700 Sendero .7mm Rem Mag. I will admit, I had mixed emotions about a clamp on break, but wasn't ready to spend the money on having the barrel threaded. Main reason I wanted a break on this rifle was to help with muzzle rise. This rifle would raise the bipod off the ground 3 to 4 inches on recoil. which made getting back on target very difficult. After installing the Witt Machine Clamp on Muzzle Break,there is NO muzzle rise, bipod does not leave the ground. The recoil is less than my .243, I can actually see my shots hit at 100 yds. And took my shot group size from 1/2 moa to 1/4 moa. I am very impressed, and satisfied! I urge anyone considering purchasing this break to stop thinking about and just do it! You wont be disappointed!
Date Added: 02/23/2017

| jonathan Mcdonald 22-05-2018 19:53

I mounted this on a Remington 700 270win. Before mounting the break it would jump all over the bench and I could not keep the scope on target. Mounted the break and it stays put on the bench and on target. Feels like a 223 now. A must have for any rifle and I would absolutely buy another one for my next rifle.
Date Added: 03/05/2017

| Jason Potter 22-05-2018 19:53

Made my 7STW, with 175-180gr bullets @3100 FPS+ a joy to shoot from the bench & prone! No waiting weeks for a smith to thread your barrel! Will be ordering another for a 300RUM this week. Thanks Witt Machine
Date Added: 03/22/2017

| Jimmy Walters 22-05-2018 19:50

After several days of research, I decided to purchase the clamp on brake from Witt Machine. This is a beautiful piece of machine work, fits perfectly, very easy install. The break tamed my 7mag to the point of a 270. Also the break arrived a day sooner than I expected.
Date Added: 04/10/2017

| Robert Termini 22-05-2018 19:49

Ok i got to say is holy crap im 100%satisfied with the bolt on its ben awhile sence i shot a 234 but i realy think my 300 wm is kicking just a little less then that good job guys i got 3 other guys coming your way and thanks for a great muzzle brake
Date Added: 04/22/2017

| Tom Handerhan 22-05-2018 19:48

4/26/17 i received my bolt on muzzle brake for my mossberg atr 100 .30-06 last saturday, installed it that day, went shooting the following morning. With a few little adjustments on the scope i was extremely pleased with the reduction in recoil and muzzle rise!! before my rifle was a kicker, but now its tamed down to be able to really enjoy shooting it! thanks for the great product -Tom
Date Added: 04/26/2017

| Yves Boies 22-05-2018 19:48

I ordered a clamp on muzzle brake to fit on my Tikka Varmint 223 to avoid muzzle rise. Well documented and easy to fit on barrel. Works great. I really enjoy and my daughters too. Thanks again.

This my second one. My first one was to fit on my Tikka Sporter 308 threaded barrel. Works very nicely too. I recommend.
Date Added: 04/27/2017

| John Nitecki 22-05-2018 19:46

thanks for making such a great product. I put it on my Savage Mod. 16 in 270 WSM and it fit perfect. I was ready to get my rifle barrel threaded. Then I saw your clamp on brake and I ordered, installed it in minutes. Went to the range the next day.
I fired of 40 rounds with out using my heavy rest, just using bags. The recoil felt less then my 243 Win. The rifle muzzle had very little rise, was quick to recover and get back on target.
Again, this is great brake. I will be ordering one for my 30-06. Thanks Witt Machine.
Date Added: 05/15/2017

| Jeremiah Mani 22-05-2018 19:46

So glad I took the chance on the clamp on muzzle brake. Installed it on my Ruger Hawkeye Varmint Target 6.5 creedmoor and I can watch bullets impact my target. The machine work on this brake is perfect, installed with zero problems. I will be purchasing many more for all of my guns. Great work guys!!!
Date Added: 05/17/2017

| Chris O'Kelley 22-05-2018 19:45

I bought this for my .308 ar10 and it eleminated the recoil enough to where I could rapid fire it and it would feel the same as a .223
Date Added: 05/31/2017

| Marvin Smith 22-05-2018 19:45

Impressed with this product, was skeptical at first but this clamp on muzzle brake is the real deal. Installed on my Savage Model 10 Tactical in .308 easily reduced recoil down to a .243 and minimized muzzle flip. I have developed long range loads that are competitive in this setup..Thank you Witt Machine.
Date Added: 06/04/2017

| Daniel Carrillo 22-05-2018 19:44

The brake fit perfect and installed very easily, the major reduction in recoil and muzzle jump made shooting my old 30-06 like shooting a .243. Congrats Witt Machine on a great product.
Date Added: 06/30/2017

| Dan Devlin 22-05-2018 19:44

I have a .30-06 Weatherby bolt action. The recoil was unbearable, I had a headache after 20 rounds, and often got hit in the face by the scope. I could also barely get shots on paper at 100 yards because I was so scared of recoil. When they 50% recoil reduction THEY AREN'T KIDDING, COULD NOT BE MORE IMPRESSED. After a small scope adjustment to get on paper the first 3 rounds were touching each other at 100 yards. Recoil went from 12 gauge plus a 45 acp to around 20 gauge.

You can see the blasts coming out of this thing, 5 ft in each direction and boy is it hilariously loud, the shooter wont notice anything but people next to you will notice.

I had a little bit of trouble installing it to be pointed exactly upwards, but if you slide it on, get it perfectly upright then mark that spot on the barrel and break, it will be easier.

I could not recommend any product more than this. also exemplary customer support, replies in under a minute.
Date Added: 07/09/2017

| KEITH MATTHEWS 22-05-2018 19:43

I installed on Savage Model 10 FCP .308 and it is really cool to be able to watch the bullet impact target. Very effective brake
Date Added: 07/20/2017

| Randy Flenker 22-05-2018 19:43

My second muzzle brake from these fine fellows. Installed on my 2506 AI, reduced the recoil to 223 range. Also have one on my 300 Win Mag, tamed that beast. Tightened up groups by at least 25% to less than .5". If your on the fence about getting one of these, jump off and order now!!
Date Added: 07/22/2017

| Randy Wright 22-05-2018 19:42

Ordered the clamp-on muzzle brake for my R-25 in 308 win. Arrived at my mail box in just a few days. Tried brake on barrel for test fit before applying lock-tite. Slipped on for perfect fit. Followed instructions provided with brake using blue lock-tite. I used scope mounting levels to align brake. I can't wait to get to the range. I am not worried about recoil reduction(308 recoil not bad)as much as muzzle rise reduction. Gun jumps off rest when fired!
The brake looks GREAT in black ceracoat and machining appears flawless. Thanks Witt Machine for a great product and great service. I will update results after trip to range.
Randy Wright
Date Added: 07/30/2017

| ROBIN FAIRBURN 22-05-2018 19:41

I ordered this brake for my 6.5 creedmoor it fit perfect with out any issues.I took it to the range and it reduced my recoil by more than half I can shoot and see my rounds impact on the target .I will be ordering one for my 6.5x47 Lapua thanks for the awesome brake!!!
Date Added: 08/05/2017

| Dr. Stanley F. Pietrzak, Jr. 22-05-2018 19:41

My Ruger American rifle (30-06) barrel was not within Ruger's mfg. tolerances and first brake did not fit properly. I supplied Witt with the measurements for my rifle and the new muzzle brake fit perfectly. Very pleased with re-make. I'm impressed with Witt's guarantee of workmanship. I've showed it to some of my friends at work (NASA engineers like myself) and they are impressed with the quality of his product and will be ordering some of these for their weapons (both threaded and clamp-on). I told them to be careful in making the measurements and to be as accurate as possible. I also told my friends that it would be best to use measurements for the Ruger American rifle to assure an accurate fit because with Ruger, some larger variations in barrel size does exist. The clamp-on brake that I ordered for my Remington 783 (30-06) was a perfect fit with the measurement that I supplied Witt. (Captain, US Army, Vietnam era vet)
Date Added: 08/10/2017

| Donald Terrie 22-05-2018 19:40

I mounted this bad boy on a Browning A-bolt 300 Win Mag. What a difference in muzzle rise and recoil! AAA+ product!
Date Added: 08/10/2017

| Brandon Norman 22-05-2018 19:40

Excellent brake!!! I used it on a Remington 700 in 270 win. The brake tames it down so much it's about at a 243 recoil! Maybe even less. Watching someone shoot my rifle you can really see how effective it is at redirecting gasses upon firing. Just be sure to not stand next to one in use! I will be buying more!
Date Added: 08/13/2017

| Ashley Stone 22-05-2018 19:39

Fit great and shipped fast! Best price in North America as well!
Date Added: 08/16/2017

| Don Johnston 22-05-2018 19:38

Just ordered my 3rd Brake from these fine folks and will buy nore as the grand kids into larger rifles. All you 7MM shooters know this brake makes it fun to shoot again.
Date Added: 08/17/2017

| Douglas Lash 22-05-2018 19:38

Have installed two clamp-on muzzle breaks so far. 1ST on a Savage varmint rifle in 260 Rem. Recoil is now less than .223 rifle. I can now call my own hits in the scope from 200 yards on out. 2ND on an Remington XP-100 pistol in 7-08. Recoil is now mild. Hot 175 gr loads feel like mild varmint loads. Can't wait to install one of these on a large caliber TC Contender or Encore pistol. Highly recommended!
Date Added: 08/29/2017

| Greg Hoover 22-05-2018 19:37

I was finally able to test this out on my Remington 700 Long Range in 300 WM. Wow, what a great product. It makes the 300 WM a joy to shoot.
It took a while to install it because of the very tight fit and tight tolerances, but well worth the time. Excellent product. I'll use Witt again whenever I need another muzzle break.
Date Added: 08/30/2017

| Robert Reading 22-05-2018 19:37

I received my Clamp-On muzzle brake yesterday and attached it to my Weatherby S2 308 rifle. WOW!!! It performed perfectly; making it more comfortable for my bony shoulder(getting old) as well as being able to retain target shot after shot. It also enabled me to reduce my grouping to 1/4" to 3/8" average. Thankyou very much Ken Wittekiend for a VERY finely made piece of equipment. I'll be telling my shooting and hunting friends.....You may get more business from up North. Thanks Again.
Date Added: 09/09/2017

| David Higgins 22-05-2018 19:36

I have now purchased 5 of the clamp on brakes. Two for my kids and two for my dad. They worked like magic. my kids went from flinching and wanting to call it a day after 5 shots too wanting to shoot all day. My dad had an electric gizmo surgically implanted in his shoulder and was afraid he would have to give up shooting. He couldn't even feel his 270. I have one on order and plan on getting at least one more.
Date Added: 09/09/2017

| Richard Reau 22-05-2018 19:36

Worth the money for sure. Put it on my 300 Win Mag. Shot half a box and could have kept going but those rounds aren't cheap. It went from a shoulder punisher to hitting about like a 12ga. 2 3/4 high brass.
Date Added: 09/18/2017

| Frank J Thomas Jr 22-05-2018 19:35

Purchased the MB1 Muzzle Brake in Black Ceracote to mount on my Remington 700 chambered in .308 Winchester. I measured the OD of the barrel at the muzzle end (.660") with my calipers and took another measurement 1-1/2" from the crown of the muzzle (.662") per the instructions on the Website and placed the order - I received the product within a week. Upon inspection, I can only comment on how well this Muzzle Brake was machined and finished - literally, a work of art. It fit like a glove on the end of the barrel without any perceptible play or "slop" - very impressed! I used blue Loctite and incrementally torqued the 4 screws to the recommended torque (DO NOT OVER-TIGHTEN!) and took it out to the range. My rifle was already zeroed at 100 yards and my groups were just as tight with the Muzzle Brake installed as they were prior without the Muzzle Brake. At 200 yards shooting from the prone position with a bipod, my groups actually tighted-up - probably because of the significantly reduced recoil. Although there are reports of the increased blast noise associated with the use of Muzzle Brakes of this design, I did not - nor did my fellow shooters on either flank notice anything out of the ordinary with the blast noise of the .308 Win - any shooter should use proper hearing protection, anyway, so I think that the noise comments are a non-issue. Fantastic product and it Looks Cool Too! I highly recommend this Muzzle Brake to my fellow shooters throughout the USA. F J Thomas - NRA Training Counselor and CMP Master Military Rifle Instructor.
Date Added: 09/22/2017

| Mike Wilkes 22-05-2018 19:35

Hello Ken W. just wanted to drop you and your team a quick line thanking you all for the nice job you have done on my Muzzle Brake, for my Savage 111 .270 it fit perfect and helps with the recoil on my tired worn out shoulders. I will pass around your name when I'm at the range. Respectfully Mike Semper Fi
Date Added: 10/07/2017

| Jayson Sage 22-05-2018 19:34

Great MADE IN THE USA product, perfect fit, I will be purchasing more.
Date Added: 10/09/2017

| Quentin Short 22-05-2018 19:33

Ordered a clamp on brake for my wife. It is the best money I've ever spent. Now her 30.06 has the recoil of a .223. I was very sceptical of the 60 percent recoil reduction claim, but I believe it was more like 80. I will buy more. Just want to say thank you to the folks at Witt. service and product we're both first rate! Would recommend to anyone and everyone.
Date Added: 10/11/2017

| Timothy Simpson 22-05-2018 19:33

Ordered the clamp on muzzlebreak for a Remington 700 7mag the recoil reduction is almost unbelievable I am very impressed with the clamp on muzzlebreak I love love love it recommend to any and everyone if you wonder if it worth the money I say every bit if you love the 7rem mag but hate the recoil buy this and problem solved THANKS WITT AAAAA+++++
Date Added: 10/20/2017

| Anthony Bahm 22-05-2018 19:32

Wow! That's all I can say! I took a chance and ordered this muzzle brake for a 7mm-08 rifle in hopes it would reduce the kick so my 12yo could use it on his first hunt. I sent in the measurements of my barrel that I took with an Electronic Digital Caliper and placed the order. I received my new brake about 7 days after placing the order which, I thought, was great! The new brake looks awesome, not too big or bulky, which was a concern of mine before ordering and it fit perfectly on my barrel without any play whatsoever. The directions were easy to read and I followed the instructions for mounting it. I liked the fact that it came with 4 screws instead of 3 for extra insurance. I shot the gun today and what a difference! Kick was greatly reduced and seemed to match the kick of my 22-250. Thank you for a great quality product! I will be ordering one for my AR next and Witt Machine will be recommended to all of my friends!
Date Added: 10/24/2017

| David Scheffel 22-05-2018 19:32

If I could them 6 stars I would. I installed Clamp On Muzzle Brake on a 378 weatherby mag. a few months back. After the hot weather and storms we have in Florida I finely got to the range. I took the 378 and a win. 308. After a few rounds through both guns I didn't see any difference in recoil. This is a great muzzle brake, the fit is great, and looks great. Thanks Witt Machine Dave
Date Added: 11/02/2017

| Jayson Sage 22-05-2018 19:31

After shooting my 300 win mag with this break installed it has reduced the recoil close to 80%, before when firing a round my muzzle would jump up and off target my several inches but with this break installed there is no more muzzle rise and my rifle stays on target, I am very very pleased with this product, great job!
Date Added: 11/06/2017

| Daniel Neumann 22-05-2018 19:30

rec'd my replacement muzzle brake today. I returned the first after measuring the barrel wrong thinking that you would make the adjustments to the old brake that I noted. I did not expect to receive a new brake, post paid, no questions asked. I am just blown away with your business acumen. I expected at the very least a retooling of the brake and a C.O.D. charge,which would have been very fair in my book as all I had to do is make sure that the measurements were correct. You guys are just plain AWESOME!! Thank you and my order for a 7MM Mag brake will soon follow as well as letting all my friends know of your great business and customer appreciation. Thank you! You guys are one of a kind.
Date Added: 11/20/2017

| Jeff Weekes 22-05-2018 19:29

I received my clamp on muzzle brake for my .308 as an injury requires me to use a brake. I am extremely satisfied with it. It not only reduced recoil allowing me to see impacts on steel targets it also tightened up groups with various types of ammo. I had to return it originally after a measurement error on my part - the guys at Witt Machine stated simply "they wanted me to be happy with the product"... returned, remade and I am one happy customer. I am in Canada and the sales dept made me aware of the shipping issues before I ordered it (again great customer service in making me aware it could and did take a long time to arrive). I am very satisfied.
Date Added: 11/21/2017

| ASHLEY CUSTODIO 22-05-2018 19:29

I was like most of the guys out there that are skeptical about the clamp on brake but I took the plunge and bought (2) of them, one for my Nosler 300 Win Mag and 243. Mounted both of them as per the instructions and was I surprised of the difference they made. Significant reduction in recoil and muzzle rise. I didn't want or should I say I wasn't sure I wanted to thread my bbl so I got these as alternative. These work very well with no permanent damage to your equipment. Will likely order a threaded version for my Tikka CTR next. great buy for the money! Wish I could attach a picture to this review.
Date Added: 11/21/2017

| Donald Terrien 22-05-2018 19:28

I purchased one of these for my Browning A-bolt 300 Win Mag. I could not be happier with the way it calmed the kick and muzzle blast down! AAA+ quality & design! I now have three of Witt Machine muzzle breaks on my Guns!
Date Added: 11/22/2017

| David Deacon 22-05-2018 19:26

I am very impressed with the clamp on brakes. I have ordered 5 of them so far. It really surprised me how quickly the first one came and the quality was incredible. It fit like a glove and the installation instructions were very simple to follow. One of them was a little tight, no doubt due to my attempt to get it tight and I had to follow the instructions to spread it slightly but it slipped on easily and worked flawlessly. I really like the fact that if I ever choose to sell a firearm (not likely while I am on this earth) and the new owner does not like brake loosening the 4 screws allows them to remove it easily! Like most brakes they are loud but they don't seem to be any louder than a BOSS I have on a Browning BAR 270WSM. There is zero muzzle jump and the rifle recoils straight back. I love them and a buddy of mine just ordered 2. I give them A+++ on quality and A+++ on ease of order and A+++ on communication.
Date Added: 11/24/2017

| robin ricci 22-05-2018 19:26

all reviews are 100% correct; product performs fantastic and looks down right military in nature !! guys at the range think I have a fifty cal, but its a 30-06. kicks like an SKS which is barely more than a 223. am getting another.
Date Added: 11/25/2017

| Joshua Carlson 22-05-2018 19:11

I've got other adjustable gas blocks and I like this one the best, I like the fact that at anytime I can take it off no matter what. And it was so easy to adjust the gas flow on my AR. Thank you
Date Added: 11/27/2017

| DAVID WARREN 22-05-2018 19:10

Date Added: 11/28/2017

| Danny Tilson 22-05-2018 19:10

Just installed this on my 300 Winn Mag,fits like a glove.Very Very well made,I highly recommend one of these for your gun,you will not be disappointed!!!
Hoss Tilson
Date Added: 12/12/2017

| James Davis 22-05-2018 19:09

Last deer season I ordered and installed a "Clamp On Brake" on my Ruger M77 30.06 (tang safety). The 30.06 isn't a brutal cartridge, but when repeatably shot it can become unpleasant. This brake significantly reduced recoil and did not cause any changes in accuracy. I floated the barrel and bedded the action on my Ruger and it shoots sub-moa. I highly recommend Witt Machine.
Date Added: 12/27/2017

| PHILIP Hopkins 22-05-2018 19:09

Tamed my 30-06 to a .223. Easy fitting (with correct measurements), clear concise directions. I can watch bullet impact clearly at any distancd. Perfectly machined
With a non-glare finish. A true bargain in the gun world. Even comfortable for my petite wife to shoot accurately and comfortably.
Date Added: 12/29/2017

| Eddie Slocumb 22-05-2018 19:08

Installed the clamp-on brake on my Mossberg Patriot 300 win mag and could not believe the difference! I was loading at or below minimum charge to try to reduce recoil, this thing was brutal at the range when trying to work up loads. Now the recoil is less than my 308 win. POI changed slightly high and right, but adjusted with a few clicks. I like it so much, I ordered one for my 308 last night. Great job Witt Machine! It's nice to get a quality product at a reasonable cost - very rare in today's world.
Date Added: 12/31/2017

| WILLIAM GIST 22-05-2018 19:07

Installed on mossberg patriot 2506 took almost all the recoil away thought I was shootings a 223.
Date Added: 01/08/2018

| Victor Hernandez 22-05-2018 19:07

I have two of Witt Machine muzzle brakes on two different 308 tactical rifles they work exactly as stated, they are a quality product very easy to install. The recoil reduction was amazing as was the improvement in accuracy, I just purchased my third brake for a 6.5 creedmoor, best brake for the price. Thank You for an excellent product.
Date Added: 01/26/2018

| Ramil Gatchalian 22-05-2018 19:06

Finally was able to take my .223 clamp-on to the range. The recoil on my S&W Sport II is now basically non-existent. I can't wait to get one to tame my Rem. 30-06.
GREAT PRODUCT! Thanks Witt Machine.
Date Added: 02/20/2018

| James Banks 22-05-2018 19:05

This is my second attempt at writing a review. The first one timed out. Ken, you have outdone yourself. On my .300RUM, It has tamed the beast. It expertly diverts the energy through its gills. No more friends getting broken noses are eye cuts from getting too close to my scope. My 14 year old 110 lb son doesn't get kicked hard anymore. It feels no more than his sister's .243. Putting one shot through the first and so on at 100 yards. Not an inch. Not 1/4 of an inch. One through the other. Just don't have anyone standing within 10 feet of the side. They will feel the pressure from the diverted gasses. I feel that I have cheated you only paying a total of $112 or that previous manufacturers have cheated me for the $300 and up screw on brakes in the past. I definitely will be a repeat customer on future magnum rifle purchases. I will definitely recommend Witt Machine to other range goers. I don't even mind getting on a soapbox to advertise. I had a little evil grin on my face from ear to ear when guys crowded my lane to see this and to shoot it. Some were timid. Others wanted one themselves. Three people, ten rounds, all through three same hole. Top to bottom, sided to side, split the small number 10. 1 and 0. I was asked if I had been a sharpshooter in the military on the first shot. Impressive results.
Date Added: 03/05/2018

| jared jager 22-05-2018 19:05

Wow!!!! I would spend the $89 in a blink of a eye again.. customer service is outstanding, shipping went great. Took my 300 win mag that I could only shoot a few shots thru in one sitting to having to wait for the barrel to cool off cause I don’t want to stop shooting it now. This is the best money I have spent to date on this gun. Quality and workmanship is top notch. I’m a Machinist by trade and have a eye for perfection and attention to detail. I have not one complaint about this clamp on brake. I will be a returning customer for ever. Highly recommend you guys... job well done!!
Date Added: 03/25/2018

| Donald Terrien 22-05-2018 19:04

I have purchased a Witt Machine muzzle brake for my AR-10 .308 and am extremely pleased with both the quality and performance of this muzzle brake! It prompted me to order a clamp-on muzzle brake for my Browning A-bolt in a 300 Win Mag set up. After installing it on my rifle, I would say it calmed down the rise by 30%, and the recoil kick by 40%! I just ordered a third brake from them for my 50 Cal Beowulf AR-15. And Yes...It calmed the beast down concidersbly! Witt Machine makes a very good muzzle brake and their product will be on all my future builds!
Date Added: 03/29/2018

| James Postell 22-05-2018 19:03

A week ago I put a Witt clamp-on muzzle ON my Savage Axis II with a Warne single-plate scope base and a Vortex Crossfire II 6-18x44 scope. Shooting Fed Am Gunner 140gr BTHP mostly but also some Hornady 143 ELD-X. First trip to range...2" groups; 2nd trip ...1.25" groups; 3rd trip ...1" with one group at 1/2" ...all at 100 yds. I'll expect sub-MOA from myself all the time now even with this inexpensive rifle and the Witt made a HUGE difference.
Date Added: 03/31/2018

| Samuel Bowman 22-05-2018 19:03

I put the clamp on muzzle brake on my 300 Win Mag and it was a total game changer. This rifle used to blow me backwards in my chair even when using a bipod. Now the recoil is so minimal I can watch my shots hit through the scope. The difference is unbelievable and my rifle is much more enjoyable to shoot now.
Date Added: 04/03/2018

| Stéphane Joseph 22-05-2018 19:02

I put one on my 30-06 it's unbelivable my 16 years old daughter put 3 bullets in 1 inch at 100 yard
It's like a 243 i recommand this muzzle break. I just order another muzzle for my 300 win mag.
Date Added: 04/12/2018

| Tyler smith 22-05-2018 19:01

Got this for 270 wsm for my wife and wow this thing recoils less then a 243 now. Thank you for such a great product. Fit and finish were perfect!!!
Date Added: 04/22/2018

| Richard Mills 22-05-2018 19:01

Purchased 2 clamp on brakes,one for a Weatherby Vangaurd 6.5-300wby,and one for a Remlington 700 long range 300 ultra mag,both fit perfect and worked exceptionally,the 6.5-300 kicks about like a .243 win and the ultra mag comparibly to a 30-06!Witt Machine ,job well done,exceptional product and exceptional service,highly recommend!
Date Added: 04/22/2018

| Paul Hamilton 22-05-2018 18:53

I bought this muzzle brake for my 300 Win Mag on a Rem 700 LR platform. Unbelievable reduction in recoil and almost no muzzle lift. The felt recoil is now similar to my Rem 222. I was a bit skeptical with the clamp on idea because of the pressures developed by a 300 Win Mag but it delivered as promised. Five (5) full stars. A recommended buy for sure.

5 stars based on 258 reviews